773459

Parkside Rapidfire 2.1 - IAN 321218 Manual

28
Zoom out
Zoom in
Previous page
1/118
Next page
28
GB IE
Checking the battery charge
level
The battery’s charge level is indicated by
the charge state indicator ( 5).
The state of charge of the battery is dis-
played by illuminating the appropriate LED
lights. In order to activate the display, the
on/off switch ( 9) must be pressed.
3 LEDs are on (red, yellow, green):
Battery charged
2 LEDs are on (red, yellow):
Battery partially charged
1 LED is on (red):
Battery needs to be charged
Starting up
Before the starting up must
the transport safety ( 1)
removed.
Open the transport safety ( 1) and re-
move the transport safety of the bit holder
( 3).
Operation
Switching on/off
Press the on/off switch ( 9) to start the de-
vice. To turn it off, release the on-off button.
If you move the direction switch ( 8) to
the middle position, the device is secured
against being switched on.
The LED lamp can continue to be used by
activating the switch block. To do so, press
the on/off switch.
Direction switch
You can toggle between right ( ) and left
() rotation by pushing the direction of ro-
tation switch ( 8).
If you move the direction switch ( 8) to
the middle position, the device is secured
against being switched on.
The direction changed may
only be performed in stand-
still mode!
Bit selection from the bit
changeable drum
1. Push the slide of the interchange-
able cordless screwdriver (4)
forward.
2. Turn the bit changeable drum
(14) to the left or right until the
desired bit is located on top and
is in line with the bit holder (3).
The bit changeable drum en-
gages audibly.
3. Push the slide of the interchange-
able cordless screwdriver (4) to
the back.
Only grab the side of the
slide of the interchangeable
cordless screwdriver.
Caution, risk of injury caused
by pinching!
The selected bit is automatically xed in
the bit holder ( 3).
Bit change in the bit
changeable drum
Remove the bit ( 2) from the
bit holder ( 3).
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside Rapidfire 2.1 - IAN 321218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside Rapidfire 2.1 - IAN 321218 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info