773459
24
Zoom out
Zoom in
Previous page
1/118
Next page
24
GB IE
4) USE AND TREATMENT OF
THE POWER TOOL
a) Do not overload the po-
wer tool. Use the correct
power tool for the job in
hand. With the right power
tool, you can work better and
more safely within the specied
power range.
b) Do not use the power tool
with a damaged cable.
A power tool that no longer
switches on or off is dangerous
and must be repaired.
c) Remove the plug from the
wall socket and/or remo-
ve the rechargeable batte-
ry before you change the
device’s settings, change
accessories or put away
the power tool.These safety
measures prevent accidentally
starting the power tool.
d) Store unused power tools
out of reach of children.
Do not allow persons to
use the power tool who
are not familiar with it or
who have not read the
operating instructions.
Power tools can be dangerous
if operated by inexperienced
persons.
e) Look after the power tool
and accessories carefully.
Check that the moving
parts are working proper-
ly and are not becoming
jammed and that parts
are not broken or dama-
ged in such a way that
the functioning of the de-
vice is impaired. Have da-
maged parts repaired be-
fore using thepower tool.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp
and clean. Carefully
maintained cutting tools with
sharp cutting edges are less
likely to get jammed and are
easier to work with.
g) Use the power tool, ac-
cessories etc. in accor-
dance with these ope-
rating instructions. Take
into account the working
conditions and the work
to be carried out. Using the
power tool for anything other
than its intended use can lead
to dangerous situations.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.
Slippery handles and grip sur-
faces do not permit safe opera-
tion and control over the power
tool in unexpected situations.
5) USE AND TREATMENT OF
THIS BATTERY-POWERED
TOOL
a) Only recharge batteries
using chargers recommen-
ded by the manufacturer.
If a charger that has been de-
signed for a particular type of
battery is used to charge other
batteries, there is a risk of re.
b) Only use batteries that
are intended for the po-
wer tool. The use of other bat-
teries may create a re hazard
and lead to injury.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside Rapidfire 2.1 - IAN 321218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside Rapidfire 2.1 - IAN 321218 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info