653182
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
NIIEGB
Only use the original charger from
the package to charge the battery.
The device may only be powered
with SELV (Safety Extra Low Vol-
tage) as marked on the device.
Charge the battery before the rst
time of use.
Always take heed of the applicable
safety instructions as well as the en-
vironmental protection regulations
and information.
The warranty excludes all defects
caused by improper handling.
Recharging the battery
1. Connect the charger plug to the
charging socket ( 6) of the de-
vice.
2. Plug the battery charger ( 11)
into a mains outlet.
3. When the battery is fully re-
charged unplug the battery
charger (
11) from the mains.
Red LED lights up
Battery charging
Green LEDs light up Battery fully
charged
Checking the battery charge
level
The battery’s charge level is indicated by
the charge state indicator (
5).
The state of charge of the battery is displa-
yed by illuminating the appropriate LED
lights. In order to activate the display, the
on/off switch (
9) must be pressed.
Green LED lights up
Battery fully charged
Red LED lights up
Battery needs to be charged
Starting up
Before the starting up must
the transport safety ( 1)
removed.
Open the transport safety (
1) and remo-
ve the transport safety of the bit holder
(
3).
Operation
1. Direction switch
You can toggle between right and left ro-
tation by pushing the direction of rotation
switch (
8).
If you move the direction switch (
8) to
the middle position, the device is secured
against being switched on.
The direction changed may
only be performed in stand-
still mode!
2. Bit selection from the
bit changeable drum
Push the slide of the interchangeable cord-
less screwdriver (
B
4) forward.
Turn the bit changeable drum to the left or
right until the desired bit is located on top
and is in line with the bit holder (
3). The
bit changeable drum engages audibly.
Push the slide of the interchangeable cord-
less screwdriver (
B
4) to the back.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside RAPIDFIRE - IAN 270830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside RAPIDFIRE - IAN 270830 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside RAPIDFIRE - IAN 270830

Parkside RAPIDFIRE - IAN 270830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info