706372

Parkside PZKS 1500 B2 - IAN 280657 Manual

102
Zoom out
Zoom in
Previous page
1/106
Next page
97GB / IE / NI
• Tightenthecoverplatescrewwiththe
4 mm Allen key (e).
• Beforecontinuingyourwork,make
sure that all safety devices are in good
working condition.
•
Important!
Every time that you change
the saw blade (6), check to see that it
spins freely in the table insert (9) in both
perpendicular and 45° angle settings.
•
Important!
The work to change and
align the saw blade (6) must be carried
out correctly.
8.13 Using the laser (Fig. 2/21)
• Toswitchon:MovetheON/OFFswitch
of the laser (31) to the “I” position. A
laser line is projected onto the material
you wish to process, providing an exact
guide for the cut.
• Toswitchoff:MovetheON/OFFswitch
of the laser (31) to the “0” position.
8.14 Adjusting the laser (Fig. 21)
WARNING! While adjusting the laser
(e. g. when moving the tool arm),
never actuate the ON/OFF switch (2).
Accidentally starting the power tool can
lead to injuries.
If the laser (13) ceases to indicate the correct
cutting line, you can readjust the laser. To do
so, open the screws (39) and set the laser
by moving sideways to that the laser beam
strikes the teeth of the saw blade (6).
9. Transport
•Tightenmitrelockhandle(10)inorderto
lock the turntable (15)
•Activatethereleaselever(3),press
the machine head (4) downwards and
secure with the fastening bolt (30). The
saw is now locked in its bottom position.
•Fixthesaw’sdragfunctionwiththe
locking screw for drag guide (25) in rear
position.
•Carrythemachinebythetransport
carrying handle or hold it by the
recessed handles on the sides of the saw
table.
•Whenreassemblingtheequipment
proceed as described under section 7.
10. Maintenance
Warning! Prior to any adjustment,
maintenance or service work disconnect the
mains power plug!
General maintenance measures
Cleaning
For safe and proper working, always keep
the power tool and its ventilation slots clean.
The retracting blade guard must always be
able to move freely and retract automatically.
Therefore, always keep the area around the
retracting blade guard clean.
Remove dust and chips after each working
procedure by blowing out with compressed
air or with a brush.
Clean the guard roller, automatic extension
fence and turntable regularly.
To clean the laser unit and remove any dust
using a brush.
When cleaning the plastic do not use
corrosive products.
Carbon brush inspection
Check the carbon brushes after the first 50
operating hours with a new machine, or
when new brushes have been fitted. After
carrying out the first check, repeat the check
every 10 operating hours.
If the carbon is worn to a length of 6 mm,
Transport/Maintenance
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PZKS 1500 B2 - IAN 280657 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 280657 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info