Manual Parkside PWSAP 20-L i A1 - IAN 289752 (page 26 of 114) (English, German, Dutch, French, Portuguese, Spanish)

722852

Zoom out

Zoom in

1/114

¢ Do not position your body in the

area where power tool will move

if kickback occurs. Kickback will propel

the tool in direction opposite to the wheel’s

movement at the point of snagging.

¢ Use special care when working

corners, sharp edges etc. Avoid

bouncing and snagging the

accessory. Corners, sharp edges or

bouncing have a tendency to snag the

rotating accessory and cause loss of control

or kickback.

¢ Do not attach a saw chain

woodcarving blade or toothed saw

blade. Such blades create frequent kickback

and loss of control.

Additional safety instructions for

grinding - Safety warnings speciﬁc for

grinding

1. Use only wheel types that are

recommended for your power tool

and the speciﬁc guard designed for

the selected wheel. Wheels for which

the power tool was not designed cannot be

adequately guarded and are unsafe.

2. The grinding surface of centre

depressed wheels must be mounted

below the plane of the guard lip.

An improperly mounted wheel that projects

through the plane of the guard lip cannot be

adequately protected.

3. The guard must be securely attached

to the power tool and positioned

for maximum safety, so the least

amount of wheel is exposed towards

the operator. The guard helps to protect

the operator from broken wheel fragments,

accidental contact with wheel and sparks that

could ignite clothing.

4. Wheels must be used only for

recommended applications. For

example: do not grind with the side

of cut-oﬀ wheel. Abrasive cut-oﬀ wheels

are intended for peripheral grinding, side

forces applied to these wheels may cause

them to shatter.

5. Always use undamaged wheel

ﬂanges that are of correct size and

shape for your selected wheel.

Proper wheel ﬂanges support the wheel thus

reducing the possibility of wheel breakage.

Flanges for cut-oﬀ wheels may be diﬀerent

from grinding wheel ﬂanges.

6. Do not use worn down wheels from

larger power tools. Wheel intended for

larger power tool is not suitable for the higher

speed of a smaller tool and may burst.

Additional safety instructions for wire

brushing operations - Safety warnings

speciﬁc for wire brushing operations:

1. Be aware that wire bristles are

thrown by the brush even during

ordinary operation. Do not

overstress the wires by applying

excessive load to the brush. The wire

bristles can easily penetrate light clothing

and/or skin.

2. If the use of a guard is recommended

for wire brushing, do not allow any

interference of the wire wheel or

brush with the guard. Wire wheel or

brush may expand in diameter due to work

load and centrifugal forces.

Additional angle grinder warnings

¢ Only use grinding discs where the indicated

rotational speed is at least as high as what

has been speciﬁed on the name plate of the

product.

¢ Carry out a visual inspection of the grinding

disc before use. Do not use any damaged or

deformed discs. Replace any damaged or

worn discs.

¢ Make sure that the sparks produced by

grinding do not present a danger, e.g. reach

people or ignite ﬂammable substances.

¢ Always wear safety goggles, safety gloves,

respiratory protection and ear protection

when grinding.

¢ Never keep the ﬁngers between the disc and

spark protection or in close proximity to the

protective hoods. There is a risk of crushing.

¢ The rotating parts of the product cannot be

covered due to functional reasons. Therefore,

proceed cautiously and hold the workpiece

ﬁrmly in order to avoid slipping which could

cause your hands to come into contact with

the disc.

¢ The workpiece gets hot during grinding.

Do not touch the machined area, allow it to

cool down. There is a risk of burning. Do not

use coolants or the like.

¢ Do not work with the product, if you are tired

or have consumed alcohol or tablets. Always

have a break on time.

¢ Turn oﬀ the product and, before doing any

servicing, remove the battery pack.

28 GB / IE

289752_CB8_DE_EN_FR_NL_CS_ES_PT_170930.indb 28 9/30/17 8:11 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSAP 20-L i A1 - IAN 289752 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSAP 20-L i A1 - IAN 289752

Parkside PWSAP 20-L i A1 - IAN 289752 Additional guide - English, German, Dutch, French, Portuguese, Spanish - 73 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSAP 20-L i A1 - IAN 289752 Manual

Product: