Manual Parkside PWSA 18 A1 - IAN 104454 (page 68 of 78) (French)

595313

Zoom out

Zoom in

1/78

least as high as what has been

specied on the name plate of

the device.

- Do not use any broken, cracked,

or otherwise damaged grinding

discs.

- Never operate the device with-

out protective equipment.

- Support plates or workpieces to

reduce the risk of kickback from

a jammed cutting disc. Large

workpieces may bend under

their own weight. The workpiece

must be supported on both sides

of the disc, near the cutting disc

as well as at the edge.

Keep your hands away from

the disc when the device is in

operation. Risk of injury.

Information on replace-

ment:

• Never operate the device without

protective equipment.

• Ensure that the rotation speed

stated on the grinding disc is the

same or higher than the nominal

rotation speed of the device.

• Ensure that the grinding disc

dimensions match those of the

device.

• Only use awless grinding discs

(ringing test: when you strike the

grinding disc with a plastic ham-

mer, it results in a clear sound).

• Never re-drill a locating hole

which is too small to make it

larger.

• Never use separate bushings or

adapters in order to make grind-

ing discs with a hole that is too

large t the device.

• Do not use any saw blades.

• To clamp the grinding tools

only use the clamping ange

provided. The pads between the

clamping ange and the grind-

ing tools must be made of elastic

materials e.g., rubber, soft card-

board etc.

• Always reassemble the device

completely after replacing the

grinding disc.

Turn off the appliance and, before

doing any servicing, remove the

battery.

Wear protective gloves when chang-

ing the grinding discs in order to

avoid cutting damages.

The grinding disc nut must not be

screwed too tightly in order to

avoid breaking the disc and nut.

Turning on and off

1. Press the on switch to start the device.

Press the on/off switch (5).

2. To turn it off, release the on-off button.

The device turns off.

After switching on the device, wait until the

device has reached its max. speed. Only

then should you start with the work.

The disc still runs even after

the device has been switched

off. Risk of injury.

Trial run:

Always carry out a trial run before carry-

ing out your rst grinding procedure and

after every disc replacement. Switch the

device off immediately if the grinding disc

is not rotating smoothly, if considerable

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWSA 18 A1 - IAN 104454 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWSA 18 A1 - IAN 104454

Parkside PWSA 18 A1 - IAN 104454 User Manual - English, German, Dutch - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWSA 18 A1 - IAN 104454 Manual

Product: