576693
5
Zoom out
Zoom in
Previous page
1/91
Next page
2
PWS 125 A1
GB
IE
ANGLE GRINDER PWS 125 A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all operating and safety instructions.
Use the product only as described and for the
areas of applications specifi ed. Please also pass
these operating instructions on to any future
owner(s).
Intended use
The appliance is intended for cutting, rough cutting
and brushing metal work materials without the use
of water. Any other usage of or modifi cation to the
appliance is deemed to be improper usage and
carries the risk of serious personal injury. The manu-
facturer accepts no responsibility for damage(s)
resulting from improper usage.
The appliance is not meant for commercial use.
NOTE
Slots in load-bearing walls are subject to
the standard DIN 1053 part 1 or country-
specifi c regulations. These provisions must be
strictly adhered to. Please seek the advice of
the responsible structural engineer, architect,
or the supervising construction management.
Features
Safety lock-out
ON/OFF switch
Cover for carbon brushes
Additional handle
Adjustable blade guard
Tensioning nut
Mounting spindle
Mounting ange
Metal cutting disc
Spindle locking button
Rotational speed preselector adjusting wheel
Spanner (Fig. B)
Screws
Package contents
1 angle grinder PWS 125 A1
1 metal cutting disc
1 additional handle
1 blade guard
1 spanner
1 operating instructions
Technical data
Nominal load: 1200 W
Rated voltage: 230–240V
~
50Hz
Rated speed: n 12000 min
-1
Continuously variable
rotational speed: 3000–12000 min
-1
Spindle thread: M14
Protection class: II /
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745 The A-rated noise level of the
power tool is typically:
Sound pressure level: L
PA
= 91 dB (A)
Uncertainty: K = 3 dB (A)
Sound power level: L
WA
= 102 dB (A)
Uncertainty: K = 3 dB (A)
Vibration values:
Angle grinding
(main handle): a
h, AG
= 13.431 m/s
2
Angle grinding
(additional handle): a
h, AG
= 9.770 m/s
2
Uncertainty: K = 1.5 m/s
2
Wear ear protection!
NOTE
The vibration level specifi ed in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specifi ed in EN 60745 and can be used to
make equipment comparisons. The specifi ed
vibration emission value can also be used to
make an initial exposure estimate.
IB_102828_PWS125A1_LB3.indb 2 22.08.14 11:48
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWS 125 A1 - IAN 102828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWS 125 A1 - IAN 102828 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info