674496
10
Zoom out
Zoom in
Previous page
1/30
Next page
10
GB
IE
Initial Operation
Connecting without adapter:
1. Connect the high-pressure scrubber
to the spray gun of your PARKSIDE
high-pressure cleaner by inserting and
screwing in (bayonet locking device)
the high-pressure connection on the gun
side (1).
Connecting with adapter:
1. Attach the adapter (5) to the high-pre-
ssure connection (1) and turn it through
90° until it locks into place (bayonet
locking device).
2. Connect the spray gun of the high pre-
ssure cleaner (bayonet locking device)
and screw the cap nut (4) of the adap-
ter (5) against the spray gun.
On all surfaces, test the brush (5)
initially on a location that is not
visible, in order to ensure compati-
bility.
Disconnecting:
Removal of the pressure scrubber is in the
reverse order.
1. Release the cap nut (4) on the adapter
(5).
2. Release the locking devices by pres-
sing and turning through 90° in the
opposite direction (bayonet locking
device).
Using cleaning agents
Use a neutral, biodegradable cleaning
agent. Always use the cleaning agent in
accordance with the manufacturer‘s instruc-
tions.
Cleaning/maintenance/
storage
Always remove the mains plug of
the high pressure cleaner before
working on the device. Otherwise,
there is a risk of electric shock.
Clean the equipment with a damp
cloth.
The equipment is maintenance free.
Store the equipment in a frost-proof
room.
Waste disposal
and environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a re-
cycling centre when you have nished with
them.
Spare parts/Accessories
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see “Service-Center”, page 11). Please
have the order number mentioned below
ready.
9 Adapter .......................30300505
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWB 30 A1 - IAN 297590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWB 30 A1 - IAN 297590 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info