731959
23
Zoom out
Zoom in
Previous page
1/108
Next page
23
IEGB
Never overload the equipment.
Always work within the stated
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it is
not intended.
Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
Electrical safety:
CAUTION! The following
states how to avoid accidents
and injuries due to electric
shock:
Never cross the extension cable
while the device is operating.
Always keep the extension ca-
ble behind the device operator.
Should the power cable be-
come damaged during work,
then instantly disconnect the
power cable from the mains.
DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN
DISCONNECTED FROM THE
MAINS! Risk of electric shock.
Before each usage, check the
mains power cable and the
extension cable for damage
and signs of aging. Do not use
the device if the cable is dam-
aged or worn. Damaged mains
power cables increase the risk
of electric shock.
If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
ed person in order to prevent
hazards.
Check that the mains voltage
is the same as indicated on the
rating plate.
Connect the equipment to a
power socked with a residual-
current circuit breaker that has
a rated current of not more than
30 mA.
Protect the equipment from
moisture. The equipment must
not be moist nor operated in a
moist environment. Water entry
into the equipment increases the
risk of electric shock.
Avoid body contact with
earthed parts (e.g. metal
fences, metal posts). There is an
increased risk of electric shock
if your body is earthed.
Only use extension cables with
a maximum length of 75 m
that have been approved for
open-air use. The stranded cord
diameter of the extension cable
must be at least 2.5mm
2
. Al-
ways unreel a cable drum to its
full length so that the entire ca-
ble can be inspected for dam-
age.
Use the envisaged cable sus-
pensions when attaching an
extension cable.
Never carry the equipment by
its power cable. Never pull the
cable to disconnect the plug
from the mains socket. Protect
the cable from heat, oil and
sharp edges. The mains power
cable could be damaged.
23


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pub-500-b1---ian-324369

Reset search

  • how does the wire brush holder lock onto the drive spindle it just slides on and can be pulled off with the wire brush fitted tis cant be right it will flip off when switch on and used. Submitted on 16-8-2023 at 21:02

    Reply Report abuse
  • I have a new pub 500 b1 electric multi purpose brush from Parkside I can see no way that the wire brush holder will lock onto the drive spindle. Surely it will fly off when I try to use it on my Drive. Submitted on 16-8-2023 at 20:59

    Reply Report abuse
  • how does the wire brushArbour lock onto the drive spindle Submitted on 16-8-2023 at 20:55

    Reply Report abuse
  • Is this for getting rid of weeds on your outdoor patio Submitted on 12-5-2023 at 17:33

    Reply Report abuse
  • Is this for getting rid of the weeds on your patio Submitted on 12-5-2023 at 17:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PUB 500 B1 - IAN 324369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PUB 500 B1 - IAN 324369 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info