706355
31
Zoom out
Zoom in
Previous page
1/118
Next page
PTS 710 A1
28 
GB
IE
Inserting/replacing the battery
Open the battery compartment cover with a
matching slotted screwdriver.
If necessary, remove the used battery.
Insert a new 3 V button cell (type CR 2023) in
accordance with the polarity shown. Screw the
lid of the battery compartment cover
back
on.
CAUTION!
If operating and adjustment equipment is used
or procedures other than those specified here
are carried out, this may result in hazardous
radiation exposure.
Setting up
NOTE
The appliance is equipped with a Power on/
control lamp
. This lights up green as soon
as the appliance is connected to the mains.
This indicates that the appliance is live.
Check base plate/blade guard:
WARNING! RISK OF INJURY! Always
remove the plug from the mains pow-
er socket before carrying out any
work on the appliance.
Check the freedom of movement of the base
plate before each use
.
Activate the safety lock-out
and keep it in
that position. Lower the circular saw. In this way,
you can test the function of the base plate . It
must move freely. It may not jam.
After letting go, it must be move smoothly back
to its starting position of its own accord.
Switching on and off
Switching on:
Activate the safety lock-out
and keep it in
that position.
Press the ON/OFF switch
. Once the saw is
running, you can release the safety lock-out .
Switching off:
Release the ON/OFF switch
.
Selecting the cutting depth
NOTE
We generally recommend setting the cutting
depth to approx. 2 mm more than the thickness
of the material. This ensures that you achieve
a clean cut.
Let go of the quick-release lever of the cutting
depth preselector
. Set the desired cutting
depth on the scale . Clamp the quick-release
lever tight again.
Fitting the rip fence
Loosen the screw for the rip fence on the
base plate . Insert the rip fence into the
rip fence slot . Retighten the screw for the rip
fence .
Handling the circular saw
1. Place the machine on the material. If necessary,
align the machine with the rip fence or on a
marked line.
2. Switch on as described in the section "Switching
on and off".
3. Press the appliance forward to lower the circular
saw.
4. Saw by applying moderate pressure.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTS 710 A1 - IAN 310843 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTS 710 A1 - IAN 310843 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info