595341

Parkside PTS 500 A1 - IAN 103316 Manual

10
Zoom out
Zoom in
Previous page
1/82
Next page
10 GB/IE
Safety notices specific to the device
S
afety notices specific to this saw
Functionality of the lower guard
a) Before every use check that the safety
cover closes without problems. Do not
use the saw, if the safety cover does
not
move freely and does not close instan
tly.
Never stick or bind the safety cover, as
the saw blade would be exposed through
doing so. If the saw is dropped accidentally,
the safety cover can be bent. Ensure that the
safety cover moves freely and does not touch
either the saw blade or other parts.
b) Check condition and function of the
safety cover spring. If safety cover a
nd
spring do not work faultlessly, get the
saw serviced before using it. Damaged
parts, sticky deposits or masses of wood shavings
lead to delayed operation of the lower guard.
c) If you plunge cut at angles other than
right angles, secure the base plate of
the saw to prevent sliding sideways.
Lateral movement can lead to jamming of the
saw blade and therewith to kickback.
d) Do not put the saw done on the bench
or on the floor without covering the
saw
blade with the safety cover. An unpro
tected
running saw blade moves the saw against the
direction of the cut, and cuts everything that is in
the way. Please keep in mind that the saw runs
on.
Additional instructions:
Do not use grinding discs.
Only use saw blade diameters corresponding
with the markings on the saw.
When working with wood or materials creating
harmful dust, connect the device to a suitable
approved dust extraction system.
Wear a dust mask when cutting wood.
Only use the recommended saw blades.
Always wear ear protection.
Avoid the tips of the saw teeth overheating.
When cutting plastic, avoid melting the plastic.
Checking the guard
Pull the retraction lever for the guard all the way
back. The guard must move without sticking and
r
eturn to its original position after releasing the lever.
Circular saw blades (symbols)
Wear safety gloves!
Wear respiratory equipment!
Wear safety goggles!
Wear ear protection!
Safety notices for
cutting-off machines
a) The guard for the power tool must be
securely attached and adjusted to en-
sure maximum safety, i.e. the least
possible amount of the grinding disc is
exposed and pointed at the operator.
The operator and persons nearby must
stay away from the area of the rotat-
ing grinding disc. The purpose of the protec-
tive hood is to protect the operator from fragments
and unintentional contact with the grinding wheel.
b) Only use diamond-tip cut-off wheels
with your power tool. Simply because
accessories can be attached to your power tool
does not guarantee safe use.
c) The rated speed of the tool being used
must be at least the maximum speed
specified on the power tool. Accessories
turning faster than the rating can break and fly
about.
d) Only use abrasive wheels for the rec-
ommended applications.
For example: never grind using the side
of a cut-off wheel. Cut-off wheels are de-
signed to remove material using the edge the
of wheel. Applying force to the side of these
abrasive wheels can break them.
e) Always use intact clamping flanges
with the correct size and shape for se-
lected grinding disc. Suitable flanges will
Safety notices specific to the device
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTS 500 A1 - IAN 103316 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTS 500 A1 - IAN 103316 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info