595353

Parkside PTBM 500 A1 - IAN 102855 Manual

4
Zoom out
Zoom in
Previous page
1/58
Next page
4
GB IE
Content
Introduction .................................4
Intended purpose ......................... 4
General description ......................5
Extent of the delivery ........................5
Description of functions .....................5
Overview ........................................5
Technical Data ..............................5
Notes on safety............................6
Symbols and icons ...........................6
General Safety Directions for Power
Tools ...............................................7
Safety Instructions for
Box Column Drills .............................9
Assembly ................................... 10
Operation ..................................10
Setting up .....................................11
Selecting the speed ........................11
Checking the V-belt ........................11
Tensioning the V-belt .......................12
Adjusting the Drilling Bench.............12
Preselecting the Drilling Depth .........12
Changing the Bit ............................12
Drilling .........................................12
General Information .......................13
Switching on and off ......................13
Clamping the Workpieces ...............13
Removing Blockages .......................13
Cleaning and Servicing...............14
Cleaning .......................................14
Storage ......................................14
Waste disposal and
environmental protection ...........14
Replacement parts/Accessories ..15
Troubleshooting .........................16
Guarantee .................................17
Repair-Service ............................18
Service-Center ............................ 18
Importer ....................................18
Translation of the original
EC declaration of conformity ......51
Exploded Drawing ..................... 57
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specied.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The bench drill is designed for drilling in
metal, wood, plastic and tiles. Straight
shank drills with a drilling diameter from 3
mm to 16 mm can be used.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is not to be used by persons.
under the age of 16. Children over the
age of 16 may use the tool except under
supervision.
The manufacturer is not liable for damage
caused by an improper use or incorrect
operation of this device.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTBM 500 A1 - IAN 102855 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTBM 500 A1 - IAN 102855 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PTBM 500 A1 - IAN 102855

Parkside PTBM 500 A1 - IAN 102855 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info