679250

Parkside PSTKA 12 A1 - IAN 306438 Manual

12
Zoom out
Zoom in
Previous page
1/47
Next page
PSTKA 12 A1
■ 8 
│
 GB
│
IE
│
NI
│
CY
NOTE
► The battery pack is supplied partially charged.
Before first use, charge the battery pack in
the charger for at least 1 hour. This guarantees
full battery power. You can charge the lithium-
ion battery at any time without shortening
its service life. Interrupting the charging
process does not damage the batterybattery
pack.
► If the battery pack overheats during opera-
tion, charging is not possible. Allow it to cool
down first.
■ Never charge the battery pack
if the ambient
temperature is below 10°C or above 40°C.
1. To remove the battery pack
, press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack
into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED lights up red.
4. The green charge status indicator LED indi-
cates that the charging process is complete and
the battery pack is ready.
5. Insert the battery pack
back into the appliance.
Use
Fitting/changing the saw blade
WARNING!
► Wear protective gloves! There is a risk of
injury from the sharp cutting teeth.
► Always remove the battery pack before car-
rying out any work on the appliance.
♦ Remove the blade guard
.
♦ Turn the quick-release chuck
and hold it in
this position.
♦ Push the required saw blade into the quick-
release chuck
as far as the stop.
♦ Let go of the quick-release chuck
so that it
returns to its initial position. The saw blade is
now locked.
♦ Check whether the saw blade is firmly fitted.
■ ATTENTION! The saw blade teeth must face the
front (see fold-out page)!
♦ Replace the blade guard
on the appliance.
Fitting the rip fence
The rip fence can be fitted on the left or right of
the appliance.
♦ Undo both of the clamping screws on the inser-
tion openings
.
♦ Push the rip fence into the insertion openings
.
♦ Retighten the two locking screws.
Connecting the sawdust extractor
♦ Push the reducer into the extraction nozzle
until it is firmly in place.
♦ Attach an approved dust and sawdust extractor
to the reducer
or directly to the extraction
nozzle .
Fitting the splinter guard
The splinter guard can prevent the surface from
tearing up when sawing wood. The splinter guard
can only be used with certain sawblade types
and only at a cutting angle of 0°.
♦ Press the splinter guard
into the footplate
from below (arrow pointing upwards).
The ▲ marking on the splinter guard points
towards the front of the appliance (see also fig. 1).
Fig. 1: Fitting the splinter guard
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSTKA 12 A1 - IAN 306438 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSTKA 12 A1 - IAN 306438 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSTKA 12 A1 - IAN 306438

Parkside PSTKA 12 A1 - IAN 306438 User Manual - German, Dutch, French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info