576682
10
Zoom out
Zoom in
Previous page
1/89
Next page
6
PSTDA 18-Li A1
GB
IE
Secure the workpiece. Use clamps/a vice to
hold the workpiece fi rmly. This is safer than
simply holding it in your hand.
Never work on moistened materials or damp
surfaces.
Dust may be hazardous! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction device.
Wear a dust mask.
Ensure there is suffi cient ventilation.
Genuine accessories/auxiliary equip-
ment
Only use the accessories and auxiliary
equipment that are specifi ed in the operat-
ing instructions or that are compatible with
the appliance.
Information on saw blades
Parkside basic equipment includes saw blades
principally for use with wood and metal.
2 saw blades for general wood cutting
1 saw blade for light metals up to 3 mm
NOTE
You can use any saw blade provided it is
tted with a suitable mounting (single-lug
shank).
Saw blade type
suitable unsuitable
Before initial use
Charging the battery (see Fig. A)
CAUTION!
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
HINWEIS
Three appliances - three compatible batteries.
Interchangeable!
(see chapter ordering a replacement battery)
Never charge the battery pack when the ambi-
ent temperature is below 10°C or above 40°C.
Connect the battery pack to the rapid bat-
tery charger (see Fig. A).
Push the mains plug into the mains power
socket. The control LED will light up red.
The green control LED indicates that the
charging process is complete and the battery
pack is ready.
Push the battery pack back into the appliance.
Never recharge a battery pack again im-
mediately after rapid charging. This could
overcharge the battery pack, thus reducing the
lifespan of the battery and charger.
Switch off the charger for at least 15 minutes
between successive charging sessions.
Also disconnect the power plug from the mains
power socket.
Attaching/disconnecting the
battery pack to/from the appliance
Inserting the battery pack:
Allow the battery pack to click into place in
the appliance.
Removing the battery pack:
Press the release button and remove the
battery pack.
Checking the battery charge level
Press the battery charge level button to
check the status of the battery (see also main
diagram).
The status/remaining charge will be shown on
the battery display LED as follows:
RED/ORANGE/GREEN = maximum charge/
power
RED/ORANGE = medium charge/power
RED = low charge – charge the battery
IB_102866_PSTDA18-LiA1_LB3.indb 6 22.10.14 13:47
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSTDA 18-Li A1 - IAN 102866 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSTDA 18-Li A1 - IAN 102866 in the language / languages: English, German, Dutch, Danish, French, Finnish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info