576590
10
Zoom out
Zoom in
Previous page
1/58
Next page
6
PSTD 800 A1
GB
IE
Initial operation
Fitting/changing the saw blade
Always remove the plug from the power socket
before working on the appliance.
Flip up the pivoting guard .
Turn the quick-release chuck and hold it in
this position.
Press the required saw blade into the quick-
release chuck as far as the limit stop.
Release the quick-release chuck – it must
return to its initial position. The saw blade is
now locked.
Fitting the guide fence
The guide fence can be fi xed on the left or right
of the appliance.
Undo both the clamping screws on the insertion
openings .
Push the guide fence into the insertion open-
ings .
Retighten the two clamping screws.
Connecting the sawdust extraction
appliance
Push the extraction connector into the vacuum
extraction duct until it is secured.
Attach an approved dust and sawdust extractor
to the extraction connector .
Fitting the sliding shoe
When working on sensitive surfaces, you can fi t
the sliding shoe on the baseplate to avoid
scratching the surface.
Mount the sliding shoe onto the baseplate
and press it up at the back until it clicks into
place on the baseplate .
To remove the sliding shoe , unfasten it at
the rear of the baseplate and slide it off
forwards.
Operation
Setting the cutting angle
Undo the clamping screws with the Allen
key and pull the baseplate to the rear.
Adjust the cutting angle to 0°/15°/30°/45°
with the aid of the markings on the baseplate .
Push the baseplate to the front so that the
locking pin engages in the toothing .
Retighten the clamping screws with the Allen
key .
Setting the stroke rate
Use the stroke rate preselection adjusting
wheel to set the required stroke rate.
Setting the pendulum stroke
You can use the pendulum stroke switch to set
the pendulum movement of the saw blade .
You can achieve fi ne, clean cut edges without
pendulum movement (setting “0”). Switch the
pendulum movement off when working on thin
workpieces. You can achieve an increasingly
fast workrate with activated pendulum stroke
(settings 1–3).
Switching on/off
Switching the appliance on:
Press the ON/OFF switch
.
Switching the appliance off :
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
and lock it in this
position with the ON/OFF switch lock button .
IB_100054_PSTD800A1_LB3.indb 6 23.05.14 12:18
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSTD 800 A1 - IAN 100054 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSTD 800 A1 - IAN 100054 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info