786096
7
Zoom out
Zoom in
Previous page
1/96
Next page
7
GB IE NI
Technical data
Cordless Jigsaw &
Sabre Saw 20V .......PSSSA 20-Li B2
Nominal input voltage ................. 20 V
Idle speed n0 .................800 - 3000 min-1
Saw stroke ..................................20 mm
Cutting depth in wood
Cordless Jigsaw ................max. 50 mm
Cordless sabre saw .........max. 100 mm
Cutting depth in metal
Cordless Jigsaw ..................max. 4 mm
Cordless sabre saw ...........max. 50 mm
Weight ..................................ca. 1.7 kg
Sound pressure level
(LpA) ................... 84.3 dB(A), KpA= 5 dB
Sound power level
(LWA) .................95.3 dB(A), KWA = 5 dB
Vibration (ah)2
Cordless Jigsaw
in wood ah,B .... 9.21 m/s2; K= 1.5 m/s2
in metal ah,M .. 10.36 m/s2; K= 1.5 m/s2
Cordless sabre saw
in wood ah,B .... 8,68 m/s2; K= 1.5 m/s2
in wooden beam
ah,WB ............... 7.79 m/s2; K= 1.5 m/s2
Temperature.......................... max. 50°C
Charging process ...................4 - 40°C
Operation ..........................-20 - 50°C
Storage .................................0 - 45°C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
Levels of noise and vibration were determi-
ned according to the standards and regula-
tions in the declaration of conformity.
The specied total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
-The specied total vibration value and the
stated specied noise emission value can
also be used for a provisional assessment of
the load.
Warning:
The vibration and noise emissions
may deviate from the specied values
during actual use of the power tool, depen-
ding on how the power tool is being used
and, in particular, what kind of material is
being worked on.
Safety measures for the protection of
the operator are to be determined that
are based on an estimate of the actual
vibration load under the real operating
conditions (for this, all parts of the opera-
ting cycle are to be taken into account, for
example, times in which the electric tool is
turned off, and those during which it is tur-
ned on but running without a load).
Safety instructions
Ensure that the safety instructions are
observed when operating the trimmer.
Symbols and icons
Symbols on the device:
The device is part of the
Parkside X 20 V TEAM series.
CAUTION!
Read the instruction manual
Wear hearing protection
Wear safety goggles
Wear a respiratory mask
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSSSA 20-Li B2 - IAN 354641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSSSA 20-Li B2 - IAN 354641 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info