796072
19
Zoom out
Zoom in
Previous page
1/69
Next page
18 GB/IE/NI
The charging control LEDs (green [] and red
[]) indicate the status of the charger [] and
the battery pack [8]:
LED Status
Red LED lights up Battery pack
charges
Green LED lights up Battery pack fully
charged
Green and red LED
flashing
Battery pack
defective
Red LED flashing Battery pack too
cold or too warm
Green LED lights up
(without battery pack) Charger ready
Insert the battery pack [8] into the
charger [].
Connect the power cord with power plug []
of the charger [] to the socket.
When the battery pack [8] is fully charged:
Remove the battery pack from the charger
[]. Then disconnect the power cord with
power plug [] of the charger from the socket.
Adjusting the base plate
(Fig. E)
m WARNING!
Always switch the product off, remove
the battery pack [8] and let the
product cool down before making any
adjustments!
m CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
m CAUTION! RISK OF INJURY!
uRemove the saw blade from the product
before adjusting the base plate [4]
(see “Inserting/removing the saw blade”).
uDo not use the product without having
inserted the base plate [4].
To adapt to the workpiece, the base plate [4] can
be adjusted and swivelled to different positions.
Unlock the base plate [4]: Turn the locking
lever [1] in a counter-clockwise direction.
Adjust the desired position of the base plate
[4] by pushing it in or pulling it out.
Lock the base plate [4]: Turn the locking lever
[1] in a clockwise direction.
Inserting/removing the saw
blade
m WARNING!
Always switch the product off, remove
the battery pack [8] and let the
product cool down before making any
adjustments!
m CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
m CAUTION! RISK OF INJURY!
uDo not use any blunt, bent or damaged
saw blade.
uAlways install a suitable saw blade for the
job.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSSAP 20-Li C3 - IAN 364904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSSAP 20-Li C3 - IAN 364904 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info