779388

Parkside PSSAP 20-Li C3 - IAN 337399 Manual

33
Zoom out
Zoom in
Previous page
1/140
Next page
32 GB/IE
2) Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by hand or against
your body leaves it unstable and may lead
to loss of control.
3) Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the blade
there is a risk of injury.
4) Only when the power tool is turned
on should the sawing blade be
moved against the workpiece. There
is a risk of kickback if the accessory tool jams
in the workpiece.
5) Make sure that the base plate
is securely placed against the
workpiece during sawing. The saw
blade can tilt and lead to loss of control over
the power tool.
6) After you have finished work, turn
the power tool off and do not pull
the saw blade out of the cut until it
has come to a standstill. In this way
you will avoid any kickback and can safely
put down the power tool.
7) Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or cause
kickback.
8) Do not brake the saw blade after
switching the product off by
applying side pressure. The saw
blade may be damaged, break or cause a
kickback.
9) Tighten the material firmly. Do not
support the workpiece by hand or
foot. Do not touch any objects or the
ground with the saw running. There
is a risk of kickback.
10) Use suitable detectors in order to
find hidden supply lines or ask the
local utility company. Contact with
electrical cables can lead to electric shock
and fire, contact with a gas pipe can result
in an explosion. Damage to a water pipe
can lead to property damaged and electric
shock.
11) Hold the power tool tightly with
both hands while working and
ensure a secure footing. The power
tool is guided more securely with both hands.
12) Secure the workpiece. A workpiece
that is retained with clamping products or
a vice is held more securely than with your
hand.
13) Wait until the power tool has
stopped before placing it down. The
accessory tool can tilt and lead to loss of
control over the power tool.
14) Do not saw any materials (e.g. lead-based
paints and coatings or materials containing
asbestos) whose dust can be harmful.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSSAP 20-Li C3 - IAN 337399 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSSAP 20-Li C3 - IAN 337399 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info