Manual Parkside PSS 65 A1 - IAN 102874 (page 43 of 56) (French)

595348

Zoom out

Zoom in

1/56

3. Set up a new grinding wheel

(10). Screw the grinding wheel

nut (16) in the anti- clockwise di-

rection (left-handed thread).

4. Test run:

Before starting work and after

each change of grinding disk,

carry out a test run of at least

60 seconds with no load. Switch

off the equipment immediately if

the disk runs lumpy, substantial

vibrations occur, or abnormal

noises are generated.

Cleaning and

maintenance

Disconnect the plug before adjust-

ment, maintenance or repair.

Have any work not described

in these instructions carried

out by a specialist workshop.

Use only original components.

Allow the equipment to cool

before carrying out any main-

tenance and cleaning work.

There is a risk of burns.

Before each use, check the equipment

for obvious defects such as loose, worn

or damaged components and check that

screws or other parts are sitting correctly.

In particular, check the grinding disk (

10). Replace damaged parts.

Cleaning

Do not use cleaning agents or sol-

vents. Chemical substances may

attack plastic parts of the equipment.

Never clean the equipment under

running water.

• Clean the equipment thoroughly after

each use.

• Clean the surface of the device with a

soft brush or cloth.

Storage

• Store the appliance in a dry place well

out of reach of children.

• Grinding disks must be stored dry and

upright and are not to be stacked.

Waste disposal and en-

vironmental protection

Be environmentally friendly. Return the

tool, accessories and packaging to a recy-

cling centre when you have nished with

them.

Machines are not to be place with

domestic waste.

Hand over the device at an utilization loca-

tion. The plastic and metal parts employed

can be separated out into pure materials

and recycling can be implemented. Ask

your Service Center about this. Defective

units returned to us will be disposed of for

free.

Bonjour, je recherche le support de foret placé en façade. Pièce ronde. Merci
tlizicska@free.fr Submitted on 20-11-2022 at 11:08
Reply Report abuse
Bonjour , existille la traducion en francais , merci cela serrais tres utile en france , cordialement a vous .

durand.jeanmarie1@free.fr

Merci d'avance Submitted on 24-4-2017 at 11:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSS 65 A1 - IAN 102874 in the language / languages: French as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSS 65 A1 - IAN 102874

Parkside PSS 65 A1 - IAN 102874 User Manual - English, German, Dutch, Danish, Swedish, Finnish - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSS 65 A1 - IAN 102874 Manual

Product: