786095
23
Zoom out
Zoom in
Previous page
1/124
Next page
23
IEGB
How to connect/remove
external dust extraction
Connecting external dust
extraction:
1. Push the external dust extraction adap-
tor (10) as far as it will go on the dust
extraction connector (12).
2. Connect the extraction hose from a
vacuum cleaner (sold separately) to the
external dust extraction adaptor (10).
Removing external dust
extraction
1. Remove the extraction hose from the
external dust extraction adaptor (10).
2. Disconnect the adapter for external
dust extraction (10).
If necessary, you can connect the
suction tube of a vacuum cleaner
directly to the device without an
adapter.
Adjusting the
oscillationrate
You can set the oscillation rate variable via
the oscillation rate selector (8).
Switching on/off
Make sure that the power supply
voltage matches the voltage rating
indicated on the device‘s type plate.
Turn the machine on before you ap-
proach the material to be sanded.
Connect the machine to the power
supply.
Switching on:
Push the On/off switch (2) forwards. The
device turns on.
Switching off:
Pull the On/off switch (2) backwards. The
device turns off. Caution: The sanding plate
(7) continues to oscillate for a short time.
Wait until the plate (7) comes to a standstill.
Practical tips
When working with the ap-
pliance, always wear suit-
able clothing and appropriate
protective equipment. Prior to
each use it must be ensured
that the appliance is working
correctly. Personal protective
equipment and a fully func-
tional appliance reduce the
risk of injuries and accidents.
Do not use the device without a dust
collection box or external dust extrac-
tion. Use of a dust extraction can
reduce hazards caused by dust.
When using sanding sheets without
ventilation holes, dust extraction is not
possible. Make sure that the work-
place is well ventilated.
Pull the mains plug before any ad-
justments, maintenance or repair.
Danger of electric shock.
Move the appliance against the work-
piece once it is switched on.
After machining, lift the sanding plate up
before turning off the device.
Always lead the mains cable towards the
back and away from the device.
Clean the sanding plate before attaching
a sanding sheet.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSS 270 C3 IAN 360552 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSS 270 C3 IAN 360552 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info