Manual Parkside PSR 310 A1 - IAN 271263 (page 45 of 51) (French, Italian)

679212

Zoom out

Zoom in

1/51

45 GB

General power tool safety warnings General power tool safety warnings

c) The rated speed of the attachment must

be at least the maximum speed speci-

fied on the power tool. Accessories turning

faster than the rating can break and ﬂy about.

d) The outside diameter and thickness of

the attachment must correspond with

the specifications of the power tool. In-

correctly sized attachments cannot be properly

shielded or controlled.

e) Grinding discs, flanges, disc wheels or

other accessories must accurately fit

the grinding spindle on your power

tool. Attachments which do not accurately ﬁt

the grinding spindle will rotate unevenly, vibrate

severely and can result in losing control.

f) Do not use damaged attachments. Be-

fore each use, check attachments such

as grinding discs for chips and tears,

disc wheels for tears, wear or severe

abrasion. If the power tool or the at-

tachment is dropped, check it for dam-

age or use an undamaged attachment.

After checking and installing the at-

tachment, you and persons nearby

should stay from the level of the rotat-

ing attachment, and allow the device

to run at maximum speed for a minute.

Damaged attachments typically break during

this test time.

g) Wear personal protective equipment.

Depending on the application, wear

full face protection, eye protection or

safety goggles. Where appropriate,

wear a dust mask, ear protection, pro-

tective gloves or a special apron to

deflect small grinding- and material

particles. Protect the eyes from foreign

objects flying about during various

applications. Dust- or respirator masks

must filter out the dust which arises

during use. Exposure to loud noise for extend-

ed periods can result in hearing loss.

h) Be sure other persons keep a safe dis-

tance to your work area. Anybody

entering the work area must wear per-

sonal protective equipment. Fragments

from the work piece or broken attachments can

ﬂy about and cause injuries, including outside

the immediate work area.

i) Always hold the power tool by the in-

sulated handle surfaces when perform-

ing work where the attachment may

strikes hidden electric cables or the

power cored. Contact with a live wire may

also charge metal parts of the device and re-

sult in electric shock.

j) Keep the mains cable away from ro-

tating attachments. Losing control of the

device may result in the mains cable being cut or

caught, pulling your hand or arm into the rotat-

ing attachment.

k) Never put down the power tool until

the attachment has come to a complete

stop. The rotating attachment can come into

contact with the surface, resulting in a loss of

control over the power tool.

l) Do not run the power tool whilst car-

rying it. Clothing may get caught in the rotat-

ing tool due to accidental contact and the tool

pierce your body.

m) Regularly clean the ventilation slots

on the power tool. The motor fan will suck

dust into the housing, and a high accumulation

of metal dust can result in electrical hazards.

n) Do not use the power tool near flam-

mable materials. Sparks could ignite these

materials.

o) Do not use attachments requiring liquid

coolant. Using water or other liquid coolants

can result in electric shock.

Safety instructions for

grinding rollers

Hold the device by the insulated handle

surfaces, as the sanding sleeve may

strike the tool‘s mains cable. Damaging

a live wire may charge metal parts of the de-

vice and result in electric shock.

RISK OF FIRE DUE TO SPARKS! Grinding

metals produces sparking. Thus be very careful

not to endanger persons, and that no ﬂamma-

bles are near the work area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSR 310 A1 - IAN 271263 in the language / languages: French, Italian as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSR 310 A1 - IAN 271263

Parkside PSR 310 A1 - IAN 271263 User Manual - English, German, Dutch, Danish - 51 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSR 310 A1 - IAN 271263 Manual

Product: