796081
14
Zoom out
Zoom in
Previous page
1/148
Next page
PSBSAP 20-Li B2 GBIE │9
2-speed gearbox
CAUTION!
Operate the speed selector switch6 only
when the tool is at a standstill. Otherwise,
the tool could be damaged.
In first gear
(speed selector switch6 in position 1),
you can reach a speed of approx. 400 rpm and a
high torque. This setting is suitable for all screwing
work.
In second gear
(speed selector switch6 in position 2),
you can reach a speed of approx. 2000 rpm for
carrying out drilling work.
Operation
Switching on/off
Turn on
Press and hold the ON/OFF switch8 to start
the tool. The LED work light 0 lights up when
the ON/OFF switch8 is pressed lightly or
fully. This provides illumination of the work
area in poor lighting conditions.
Switching off
Release the ON/OFF switch8 to switch off
the tool.
Setting the rotational speed
Pressing the ON/OFF switch8 lightly yields a low
speed. Increasing the pressure increases the speed.
NOTE
The integrated motor brake ensures that the
tool stops quickly.
Changing the direction of rotation
Change the direction of rotation by pushing the
rotation direction switch7 to the right or left.
Tips and tricks
Tip! How to do things correctly.
Before operation, check whether the screw
or drill bit is correctly fitted, i.e. centred in the
chuck.
Screw bits are labelled according to their di-
mensions and their shape. If you are uncertain,
always check first whether the bit fits tightly in
the screw head without any play.
Torque
Smaller screws/bits can be damaged if you
set too high a torque or too high a speed.
Hard screw joints (in metal)
Particularly high torques occur, e.g. in metal
screw joints when using drive sockets. Select
a low rotational speed.
Soft screw joints (e.g. in soft wood)
Here, too, use a low speed to avoid damaging
the wood surface when it comes into contact
with the metal screw head. Use a countersink.
Small screws can be screwed directly into soft
wood without predrilling.
When drilling in wood, metal and other
materials, observe the following:
Use a high speed for drill bits with a small
diameter and a low speed for drill bits with
a large diameter.
Select a low speed for hard materials and
a high speed for soft materials.
Mark the spot where you want to drill using
a centre punch or nail. Select a low rotational
speed when starting.
Pull the rotating drill bit from the hole repeatedly
to remove dust and chips and clear the hole.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBSAP 20-Li B2 - IAN 364893 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBSAP 20-Li B2 - IAN 364893 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info