773450
22
Zoom out
Zoom in
Previous page
1/124
Next page
22
GB IE
Thickness .................................20 mm
Granulation ....................................36
Velocity v0 ........................max. 23 m/s
Grinding belt
Dimension ...................... 50 x 686 mm
Granulation ............................. 80/120
Velocity v0 ................................15 m/s
Weight (incl. accessories) .. approx. 7.1 k g
Sound pressure level
(LpA) ....................... 80 dB(A); KpA=3 dB
Sound power level (LWA)
measured ..............93 dB(A); KWA=3 dB
Vibration total value (ah) ........ 2.5 m/s2
* A break is introduced after 30 minutes of
uninterrupted operating duration until the
device temperature differs 2 K (2 ° C) less
than room temperature.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning! The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).
Safety Instructions
WARNING! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of in-
jury and re. Please read all these
instructions before using the electric
tools and please keep the safety
instructions.
Symbols and icons
Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Risk of cuts.
Wear cut-resistant gloves.
Never use faulty grinding disks.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBS 240 C2 - IAN 321203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 C2 - IAN 321203 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info