576767

Parkside PSBM 500 A2 - IAN 93163 Manual

24
Zoom out
Zoom in
Previous page
1/31
Next page
24 GB
Introduction
Impact drill PSBM 500 A2
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de
scribed
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Q
Proper use
The tool is intended for Impact drilling into brick,
concrete and stone as well as drilling into wood,
metal, ceramics and plastic (see Fig. B-E). The clock-
wise / counter clockwise rotation direction switch also
allows the device to be used as a driver. Any other
use or modification to the device shall be considered
as improper use and could give rise to considerable
risk of accident. The manufacturer will not accept li-
ability for loss or damage arising from improper use.
The device is not intended for commercial use.
Q
Features
1
Quick-action drill chuck
2
Front casing
3
Back casing
4
Changeover switch “drill / percussion drill”
5
Locking button for ON / OFF switch
6
ON / OFF switch
7
Rotational direction switch
8
Depth stop
9
Wing screw
10
Additional handle (see Fig. A)
Q
Included items
1 Impact drill PSBM 500 A2
1 Auxiliary handle
1 Depth stop
1 Operating instructions
Q
Technical data
Nom. voltage: 230–240 V∼ 50 Hz
Rated power: 500 W
No-load rotational
speed: max. 3000 min
-1
Percussion rate: max. 48000 min
-1
Chuck capacity: max. 13 mm
Drilling in steel: max. ø 10 mm
Drilling in wood: max. ø 20 mm
Drilling in concrete: max. ø 13 mm
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 95.2 dB(A)
Sound power level: 106.2 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Impact drilling in concrete:
Vibration emission value
a
h, ID
= 12.137 m / s
2
Uncertainty
K = 1.5 m / s
2
Drilling in metal:
Vibration emission value
a
h, D
= 5.237 m / s
2
Uncertainty
K = 1.5 m / s
2
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibration
Introduction / General safety advice for electrical power tools
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBM 500 A2 - IAN 93163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 A2 - IAN 93163 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSBM 500 A2 - IAN 93163

Parkside PSBM 500 A2 - IAN 93163 User Manual - Danish, French, Swedish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info