Manual Parkside PSBM 500 A1 - IAN 78322 (page 41 of 44) (English, German, Dutch, French)

653185

Zoom out

Zoom in

1/44

41 GB

Before first use / First use / Servicing and cleaningGeneral safety advice for electrical power tools / Before first use

Take ﬁrm hold of the back casing

of the

quick-action drill chuck

and turn the front

casing

ﬁrmly shut.

Assembly tools for screws and nuts:

When using screwdriver bits, always use a

universal bit holder.

To screw things in, always switch the changeover

switch “drill / percussion drill”

to the right to

position

First use

Switching on and oﬀ

When operating the hammer-action drill you can

select between intermittent or continuous operation

mode. In either mode the device functions as follows:

To switch on intermittent operation mode:

Press the ON / OFF switch

To switch off intermittent operation mode:

Release the ON / OFF switch

Switching continuous operation on:

Press and hold the ON / OFF switch

down

and press the locking button

To switch off continuous operation mode:

Press and then release the ON / OFF switch

Inﬁnitely adjustable

speed setting

The ON / OFF switch

has a variable speed control.

Pressing the ON / OFF switch

increases the

speed.

Setting the direction of rotation

With the rotational direction switch

you can

change the rotational direction of the electrical

tool.

NOTE: This is, however, not possible when the

ON / OFF switch

is pressed down.

NOTE: Hold the appliance in the direction of work.

Clockwise rotation:

Push the rotational direction switch

to the

right in order to drill and to screw in screws.

Anticlockwise rotation:

Push the direction of rotation switch

to the

left to slacken a screw or screw it out.

Switching between drilling /

hammer-action

Note: The hammer-action drilling mode is intended

for drilling into brick, concrete and stone only.

Note: The drill / hammer-action switch

must

only be moved after the device has come to a

standstill.

Drilling:

Set the drill / hammer-action switch

to the

right into the

position.

Impact drilling:

Set the drill / hammer-action switch

to the

left into the

position.

Servicing and cleaning

DANGER OF INJURY!

Switch the device oﬀ and pull the plug out of the

mains socket before carrying out any work on the

device.

Do not allow any liquids to enter the device.

Use a cloth to clean the device.

Clean the device after you have ﬁnished using it.

Do not under any circumstances use petrol or

strong solvents.

Store the device in a dry room.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 A1 - IAN 78322 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSBM 500 A1 - IAN 78322 Manual

Product: