779760

Parkside PRTA 20-Li B2 - IAN 334231 Manual

6
Zoom out
Zoom in
Previous page
1/104
Next page
6
GB IE NI
Cutting circle ............................. 250 mm
Line spool
Thread thicknes ........................ 1,4 mm
Thread length ..........................2 x 5 m
Weight (without battery charger) ... 2.20 kg
Sound pressure level
(LpA) .................. 77.8 dB (A), KpA= 3 dB
Sound power level (LWA)
guaranteed .......................... 92 dB (A)
measured .... 88.6 dB (A); KWA= 2.07 dB
Vibration (ah)
upper handle .... 2.76 m/s2; K= 1.5 m/s2
additional
handle .............3.46 m/s2; K= 1.5 m/s2
* The actual runtime under load of a fully
charged battery depends on how you work and
on the load put on the trimmer during operation.
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP20A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
Battery (Li-Ion) ...............PAP 20 A1
Battery cells ......................................... 5
Nominal voltage ......................... 20 V
Capacity ..................................... 2.0 Ah
Energy ..................................... 40 Wh
Charging time .................... approx. 1 h*
Temperature...........................max. 50°C
Charging process ...................4 - 40°C
Operation .......................... -20 - 50°C
Storage .................................0 - 45°C
Charger .............................. PLG 20 A1
Nominal consumption .....................65 W
Voltage input ............ 230-240 V~, 50 Hz
Voltage output ......................... 21,5 V
Voltage current ..............................2,4 A
Safety class ...................................... II
Miniature fuse ............................. T3.15A
Attention! This charger can only
recharge the following batteries:
PAP20A1, PAP20A2, PAP20A3.
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN50636-2-91, were completed success-
fully.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRTA 20-Li B2 - IAN 334231 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRTA 20-Li B2 - IAN 334231 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info