722870
22
Zoom out
Zoom in
Previous page
1/206
Next page
22
IEGB
tor head, adjustable aluminium telescopic
shaft, and a spacer bow. A hood covering
the cutting device protects the user.
Refer to the following descriptions for a
functional description of the controls.
Technical data
Cordless Grass Trimmer
.................................PRTA 20-Li A1
Motor voltage (U) ..................... 20 V
Idling speed ...............8000 min
-1
(rpm)
Protection Class ............................... III
Protection category .......................IPX0
Runtime ............................ ca. 45 min*
Cutting circle ..........................250 mm
Weight (without battery charger) 2.15 kg
Sound pressure level
(L
pA
) ............... 77.3 dB (A), K
pA
= 3 dB
Sound power level (L
WA
)
guaranteed .......................96 dB (A)
measured .. 89.8 dB (A); K
WA
=2.39 dB
Vibration (a
h
)
upper handle . 2.76 m/s
2
; K=1.5 m/s
2
additional
handle .......... 3.46 m/s
2
; K=1.5 m/s
2
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity. The vibration and noise meas-
uring processes in accordance with EN
50636-2-91, were completed successfully.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Safety instructions
Ensure that the safety instructions
are observed when operating the
trimmer.
Symbols and icons
Symbols on the trimmer
WARNING!
Carefully read these Operat-
ing Instructions.
Wear goggles
and ear defenders.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRTA 20-Li A1 - IAN 311046 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRTA 20-Li A1 - IAN 311046 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info