820046

Parkside PRT 300 C3 - IAN 446652 Manual

35
Zoom out
Zoom in
Previous page
1/196
Next page
33GB/IE
m WARNING! Risk of injury!
uBefore switching on the product, make
sure that the line spool[] does not
touch any stones, scree, or other foreign
objects.
uSwitch on the product before you
approach the grass that is to be cut.
uDo not overload the product during
operation.
uAvoid contact with obstacles (stones,
walls, fences, etc.). Otherwise the line
spool[] wears out quickly.
uAvoid using the product in bad weather,
especially if there is a danger of
lightning.
uDo not select a position for the auxiliary
handle[] that is too close to the upper
handle[2]. Otherwise you cannot control
the product properly.
uWhen working, hold the product so that
the protective cover[8] protects you from
the trimming assembly.
Cutting grass
H
oCut the grass by swaying the product
sideways to the right and left.
oCut slowly and hold the product with the
cutting circle parallel to the ground when
cutting.
oCut tall grass by a series of levels from top
to bottom.
Troubleshooting
Problem Possible cause Action
The product does
not start.
The on/off switch[1] is defective. Contact our customer service to have
the product repaired.
The motor is defective.
The product works
with intermittent
operation.
Internal loose contact.
The on/off switch[1] is defective.
The product makes
much vibration and
loud noise.
The trimming assembly is dirty. Clean the trimming assembly
(see “Cleaning”).
The motor is defective. Contact our customer service to have
the product repaired.
The trimming result
is bad.
The line spool[] does not have
enough cutting line.
Extend the cutting line if required
(see“Extending the cutting line”).
Replace the line spool[]
(see “Replacing the line spool”).
The cutting line is not led out of the
spool cover[].
1. Remove the spool cover[].
2. Feed the cutting line through the
line outlet loop[] to the outside.
3. Reinstall the spool cover[].
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRT 300 C3 - IAN 446652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRT 300 C3 - IAN 446652 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info