820046

Parkside PRT 300 C3 - IAN 446652 Manual

31
Zoom out
Zoom in
Previous page
1/196
Next page
29GB/IE
Additional safety instructions
Training
The product is not suitable for use by
children. Children should be supervised
to ensure that they do not play with the
product. Cleaning and user maintenance
shall not be made by children.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
This product is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge.
Never let children or persons who are not
familiar with the instructions mentioned use
the product.
Local regulations or by-laws may determine
the minimum age for using the product.
Read the user manual carefully. Be familiar
with the controls and the correct use of the
machine.
The operator or user is responsible for
accidents or damage to other people or
their property.
The product must not be used at altitudes
higher than 2000m.
Preparation
Before each use, carry out an inspection
on damaged, missing or wrongly mounted
protective devices or parts of the cutting
device.
Before commissioning and after any
impacts, check the product for signs of wear
and damages, and have any necessary
repairs performed.
Use only approved extension cords
(H05VVH2-F) that are not more than 75m
long and designed for outdoor use. Always
roll the extension cord completely off the
cable drum before use. Check the extension
cord for damage and ageing.
Do not connect a damaged cable to the
mains supply. Do not touch a damaged
cable before it has been disconnected from
the mains supply, as you could come into
contact with live parts.
Prior to use, check the mains cord and
extension cord for signs of damage or
ageing. If the cord is damaged during use,
disconnect it from the mains immediately.
DO NOT TOUCH THE CORD BEFORE IT
HAS BEEN DISCONNECTED FROM THE
MAINS SUPPLY. Do not use the product if
the cord is damaged or worn.
To unplug the mains cord from the socket,
always pull on the mains plug, and never
on the mains cord.
Operation
m WARNING!
uDo not touch any moving dangerous
parts before the product has been
unplugged from the mains supply and the
moving dangerous parts have come to a
complete stop.
Keep the connecting cable and extension
cable away from the cutting device to avoid
damages to the cords which can lead to
contact with live parts.
Wear safety goggles, stable shoes and
long trousers over the entire period of use
of the product.
The use of the product under bad weather
conditions, especially in case of lightning
risk, must be avoided.
There is a risk of injury from cuts on hands
and feet.
Stop using the product when persons,
above all children, and house pets are in
the vicinity.
Use the product only in daylight or with
good artificial lighting.
Always keep your hands and feet away
from the cutting equipment, above all when
you switch the motor on.
Never replace the non-metallic cutting
device with a metallic cutting device.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRT 300 C3 - IAN 446652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRT 300 C3 - IAN 446652 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info