Manual Parkside PRMA 20-Li A1 - IAN 327524-1904 (page 28 of 198) (English, German, Dutch, French, Polish)

722801

Zoom out

Zoom in

1/198

GB IE

Wear gloves when handling

theblade

Switch off the device, pull the

ignition key (12) and wait for the

blades to come to a stop. There is a

risk of personal injury.

General Cleaning and

Maintenance Work

Do not hose down the lawn-

mower with water. Electric

shock hazard

• Always keep the equipment clean. To

clean, use a brush or cloth but no de-

tergent or solvent.

• After mowing, use a piece of wood

or plastic to remove adherent plant

remains from the wheels, ventilation

holes, ejection hole and blade area.

Do not use hard or pointed objects, as

these may damage the blade.

• Before each use, check the lawnmower

for obvious defects such as loose, worn

or damaged parts. Check that all nuts,

bolts and screws are sitting ﬁ rmly.

• Check the covers and protective de-

vices for damage and check that they

are sitting correctly. Replace them if

necessary

Changing the Blade

If the blade is blunt, it can be sharpened

by a specialist workshop. If the blade is

damaged or showing signs of imbalance,

it must be replaced

1. Turn the equipment over.

2. Use sturdy gloves and hold the blade

ﬁ rmly (18).

Working with the

Lawnmower

Regular mowing encourages increased foli-

ation of the grass and kills off weeds at the

same time. Therefore, not only does each

mowing increase the density of the lawn, it

also produces an evenly resilient lawn.

The ﬁ rst cut is to be made in around April,

at a growth height of 70 – 80 mm. In the

main vegetation period, the lawn is to be

mowed at least once a week.

• Run the equipment at a walking pace,

in tracks that are as even as possible.

For gap-free mowing, the tracks should

always overlap by a few centimetres.

• Adjust the cut height so the equipment

is not overloaded. Otherwise, the mo-

tor may be damaged.

• On slopes, always work across the

slope. Take particular care when going

backwards and pulling the equipment.

• Clean the equipment after each use, as

described in the chapter on “Cleaning,

Maintenance and Storage”.

Switch off the equipment

after work and in order to

transport it, disconnect the

plug and wait until the blade

stops. There is a risk of in-

jury.

Cleaning, Maintenance

and Storage

Have work that is not de-

scribed in these instructions

carried out by a customer

service centre that we have

authorised. Use only original

parts.

The screw attaching the blade to the mower flew off and after spending two hours looking for it I have given up. What is the best way of getting a new one please? Submitted on 26-6-2021 at 18:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRMA 20-Li A1 - IAN 327524-1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PRMA 20-Li A1 - IAN 327524-1904 Manual

Product: