Manual Parkside PRMA 20-Li A1 - IAN 327524-1904 (page 24 of 198) (English, German, Dutch, French, Polish)

722801

Zoom out

Zoom in

1/198

GB IE

away from the ejection hole at

all times.

• Do not start the motor when

standing in front of the dis-

charge chute.

Caution! Danger! The blade

continues to run after switch-

ing off. There is a risk of in-

jury.

• The equipment is not to be lifted

or transported while the motor

is running. Switch off the equip-

ment if it has to be tilted in

transit, when crossing surfaces

other than grass, and when the

equipment is being transported

to and from the surfaces to be

mowed.

• Always keep the grass ejection

hole clean and clear. Remove

cut material only when the

equipment is stopped.

• Do not leave the equipment un-

attended in the workplace.

• Do not work with equipment

that is damaged, incomplete, or

has been modiﬁ ed without the

authorisation of the manufac-

turer. Do not use the equipment

with damaged safety devices or

screens or with missing safety

equipment such as deﬂ ection

and/or grass collection devices.

• Do not overload the equipment.

Work only within the speci-

ﬁ ed power range and do not

change the regulator settings on

the motor. Do not use low-pow-

ered machines for heavy work.

Do not use your equipment for

purposes other than those for

which it is designed.

• Do not use the equipment near

inﬂ ammable liquids or gases.

Non-observance will result in a

risk of ﬁ re or explosion.

• Switch the device off, remove

the safety key and take out the

battery. Make sure that all mo-

vable parts are stationary:

- whenever you leave the

apparatus unattended and

when it is not being used,

- before removing obstructions

or loosening blockages from

the discharge chute,

- before checking or cleaning

the apparatus or performing

any work on it,

- when a foreign object has been

hit by the apparatus. Check

for damage to the apparatus

and carry out the necessary

repairs before switching it on

again and working with it,

- if the apparatus starts to vi-

brate excessively, an immedi-

ate check is required.

- make sure that all nuts, bolts

and screws are properly tight-

ened.

- inspect the apparatus for any

damage.

- have any necessary repairs

carried out to damaged parts.

• Do not place feet or hands near

or under rotating parts. Do not

stand in front of the grass ejec-

tion hole during sickle mowing.

• Always pull the circuit breaker/

ignition key if:

- you leave the apparatus

unattended, before clearing

blockages,

- if you check or clean the ap-

paratus or work on it,

The screw attaching the blade to the mower flew off and after spending two hours looking for it I have given up. What is the best way of getting a new one please? Submitted on 26-6-2021 at 18:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRMA 20-Li A1 - IAN 327524-1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PRMA 20-Li A1 - IAN 327524-1904 Manual

Product: