Manual Parkside PPHSS 730 SE - KH 3021 (page 40 of 55) (English, Portuguese, Spanish)

679123

40

Zoom out

Zoom in

Previous page

1/55

Next page

39 GB/MT

General safety advice for electrical power tools

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and oﬀ

is dangerous and must be repaired.

c)

Pull the mains plug out of the socket

before you make any adjustments to

the device, change accessories or

when the device is put away. This pre-

caution is intended to prevent you from uninten-

tionally starting the device.

d)

When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone

use the device if he or she is not famil-

iar with it or has not read the

instructions and advice. Electrical power

tools are dangerous when they are used by

inexperienced people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their ori-

gins in poorly maintained electrical power

tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and

advice, and the stipulations drawn up

for this particular type of device. In

doing this, take into account the

working conditions and the task in

hand. The use of electrical power tools for

purposes other than those intended can lead to

dangerous situations.

Safety advice relating

speciﬁcally to this device

Avoiding the danger of injury, fire and

damage to your health:

 Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it in your hand.

 Always switch on the electrical power tool be-

fore placing it against the workpiece. There is

also the risk of kickback.

 Keep you hands away from the area of the

saw blade. Do not grip the underside of the

workpiece. Contact with the saw blade

14

may result in the risk of injury.

 Make sure that the base plate

9

lies on the

workpiece when sawing.

 If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

 Always work with the mains lead leading

away from the rear of the device.

WARNING!

NOXIOUS FUMES! Working

with harmful / noxious dusts represents a risk to

the health of the person operating the device

and to anyone near the work area.

Wear protective glasses and a dust

mask!

 Do not saw materials containing substances

harmful to health.

 Do not saw materials containing asbestos.

Asbestos is a known carcinogen.

 When sawing wood and in particular when

working on materials that give rise to dusts that

are hazardous to health, the device must be

connected to a suitable dust extraction device.

 Make sure you have adequate ventilation.

 Do not work on moistened materials or damp

surfaces.

 Switch oﬀ the electrical power tool after com-

pleting each stage of work but do not with-

draw the saw blade

14

from the cut until after

it has come to a standstill.

 After switching oﬀ do not brake the saw blade

14

by pressing it sideways against an object.

It could cause the saw blade

14

to be dam-

aged, break or initiate a kickback.

1

Hoe kom ik aan de 2 koolborstel houdertjes waar de koolborstels in zitten. Van beide houdertjes zijn de pennen waar de drukveer aan hoort te zitten afgebroken. Ook de beide drukveertjes voor de koolborstels zijn weg. Submitted on 16-11-2021 at 16:00
Reply Report abuse
Is it possible to bye the speedcontrol as a part? It didn't start. Can rotate some when I give the fanwheel o puch.
OR, howe to disconect the whole speedcontrol. Howe to conect the wires? Submitted on 9-6-2021 at 10:07
Reply Report abuse
parkside pphss 730 se kh 3021 I didn't start the switch is ok Submitted on 18-6-2020 at 15:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Parkside PPHSS 730 SE - KH 3021 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPHSS 730 SE - KH 3021 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PPHSS 730 SE - KH 3021

Parkside PPHSS 730 SE - KH 3021 User Manual - German, Dutch, French, Italian - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info