796059

Parkside PPFSA 40-Li A1 - IAN 376667 Manual

32
Zoom out
Zoom in
Previous page
1/236
Next page
32
GB IE
23 Mounting screw
24 Lock
25 Screw
26 Line cutter
27 Shaft mount
28 Receptor
29 Handle mount
30 Star screw
31 Uptake spindle
32 Line outlet loop
33 Spool
34 Groove
35 Washer
36 Clamping disk
37 Nut
38 Click lock
Technical data
40V Cordless
brush-cutter ............PPFSA 40-Li A1
Motor voltage U ........... 40 V ; (2 x 20V)
Idle speed spindle nmax .............7000 min-1
3 steps ............4600/5500/7000 min-1
Motor Idle speed .....................3100 min-1
Weight (without cutting tool) ...........4,9 kg
Spool
Cutting circle .......................... 340 mm
Line thickness ........................... 2.4 mm
Line length ....................................5 m
Thread ........................................ M10
Vibration (ah) at the handle
right ...............2,379 m/s2; K=1,5 m/s2
left .................2,051 m/s2; K=1,5 m/s2
2-tooth blade
Cutting circle .......................... 255 mm
Borehole ............................... 25.4 mm
Vibration (ah) at the handle
right .............3,668 m/s2; K=1,5 m/s2
left ...............2,224 m/s2; K=1,5 m/s2
Weight (operationally ready) ..........5.9 kg
Sound pressure level
(LpA) ................... 68,0 dB(A); KpA= 3 dB
Sound power level (LWA)
guaranteed ........................... 90 dB(A)
measured ..... 88,0 dB(A); KWA= 1,91 dB
Temperature...........................max. 50°C
Charging process ...................4 - 40°C
Operation .......................... -20 - 50°C
Storage .................................0 - 45°C
Levels of noise and vibration were deter-
mined according to the standards and
regulations in the declaration of conform-
ity. Vibration and noise tests have been
carried out successfully in accordance with
EN 50636-2-91.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPFSA 40-Li A1 - IAN 376667 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPFSA 40-Li A1 - IAN 376667 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info