796059
6
Zoom out
Zoom in
Previous page
1/236
Next page
6
DE AT CH
24 Verriegelung
25 Schraube
26 Fadenabschneider
27 Schafthalterung
28 Aufnahme
29 Griffhalterung
30 Sternschraube
31 Aufnahmespindel
32 Fadenauslass-Öse
33 Spule
34 Nut
35 Unterlegescheibe
36 Spannscheibe
37 Mutter
38 Klickverschluss
Technische Daten
40V Akku-
Freischneider ...........PPFSA 40-Li A1
Motorspannung U ........ 40 V ; (2 x 20V)
Leerlaufdrehzahl, Spindel nmax ...7000 min-1
3 Stufen ..........4600/5500/7000 min-1
Motorleerlaufdrehzahl .............3100 min-1
Gewicht (ohne Schneidwerkzeug) ...4,9 kg
Spule
Schnittkreis ............................. 340 mm
Fadenstärke ............................. 2,4 mm
Fadenlänge ...................................5 m
Gewinde..................................... M10
Vibration (ah) am Handgriff
rechts .............2,379 m/s2; K=1,5 m/s2
links ...............2,051 m/s2; K=1,5 m/s2
2-Zahn-Messer
Schnittkreis ............................. 255 mm
Bohrung ................................ 25,4 mm
Vibration (ah) am Handgriff
rechts .............3,668 m/s2; K=1,5 m/s2
links ...............2,224 m/s2; K=1,5 m/s2
Gewicht (betriebsbereit) .................5,9 kg
Schalldruckpegel
(LpA) ................... 68,0 dB(A); KpA= 3 dB
Schallleistungspegel (LWA)
garantiert .............................. 90 dB(A)
gemessen ..... 88,0 dB(A); KWA= 1,91 dB
Temperatur ............................max. 50 °C
Ladevorgang .........................4 - 40 °C
Betrieb ............................... -20 - 50 °C
Lagerung ..............................0 - 45 °C
Lärm- und Vibrationswerte wurden entspre-
chend den in der Konformitätserklärung
genannten Normen und Bestimmungen
ermittelt. Die Schwingungs- und Geräusch-
messverfahren gemäß EN 50636-2-91
wurden erfolgreich durchlaufen.
Der angegebene Schwingungsemissions-
wert ist nach einem genormten Prüfverfah-
ren gemessen worden und kann zum Ver-
gleich eines Elek tro werk zeugs mit einem
anderen verwendet werden.
Der angegebene Schwingungsemissi-
onswert kann auch zu einer einleitenden
Einschätzung der Aussetzung verwendet
werden.
Warnung:
Der Schwingungsemissionswert
kann sich während der tatsäch-
lichen Benutzung des Elek tro-
werk zeugs von dem Angabewert
unterscheiden, abhängig von der
Art und Weise, in der das Elek tro-
werk zeug verwendet wird.
Versuchen Sie, die Belastung durch
Vibrationen so gering wie möglich
zu halten. Beispielhafte Maßnah-
men zur Verringerung der Vibrati-
onsbelastung sind das Tragen von
Handschuhen beim Gebrauch des
Werkzeugs und die Begrenzung
der Arbeitszeit. Dabei sind alle An-
teile des Betriebszyklus zu berück-
sichtigen (beispielsweise Zeiten, in
denen das Elek tro werk zeug abge-
schaltet ist, und solche, in denen es
zwar eingeschaltet ist, aber ohne
Belastung läuft).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPFSA 40-Li A1 - IAN 376667 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPFSA 40-Li A1 - IAN 376667 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info