576627
6
Zoom out
Zoom in
Previous page
1/55
Next page
6 GB
Introduction / General power tool safety warningsIntroduction
Router POF 1200 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de
scribed
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
This device is intended to mill grooves, edges, pro-
files and slots on a wooden, plastic or light surface,
as well as copy milling. This device is not intended
for outdoor use. Any other uses, and / or modifica-
tions to the appliance, are deemed to be improper
usage and may result in serious physical injury. Not
for commercial applications.
Features
Front view figure A
1
Speed setting
2
Handle
3
Union nut
4
Collet 8 mm (preinstalled in union nut
3
)
5
Locking screw
6
Guide rail
7
Base plate
8
Sliding plate
9
Step stop
10
Spindle-lock key
11
Lock screw
12
Depth stop
13
Index indicator
14
Dial milling depth adjustment
15
Control dial (milling depth-fine adjustment)
Back view figure B
16
Clamping lever
17
Router tool
18
Drilling extractor adapter
19
ON / OFF switch
20
Start lockout
Parts figure C
21
Extractor
22
Screw
23
Collet 6 mm
24
Rip fence
25
Thrust ring
26
Copy casing
27
Open-ended spanner with slot
28
Reducer
29
Sliding bar with screw for rip fence
24
30
Centring pin
31
Socket head wrench
Router set figure E
32
Round and profile cutter ∅ 22 mm / R 6.3 mm
33
Round and profile cutter ∅ 28.6 mm / R 9.5 mm
34
Round and profile cutter ∅ 25 mm / R 4 mm
35
Hollow cutter ∅ 12.7 mm / R 6.3 mm
36
Hollow cutter ∅ 22 mm / R 6.3 mm
37
V-groove cutter ∅ 12.7 mm / Angle 90°
38
Bevel cutter ∅ 32 mm / Angle 45°
39
Flush cutter ∅ 12.7 mm
40
Dovetail cutter ∅ 12.7 mm / Angle 14°
41
Slot cutter ∅ 6 mm
42
Slot cutter ∅ 12 mm
43
Slot cutter ∅ 16 mm
Scope of delivery
1 Router
1 Open-ended spanner with slot
1 Collet 6 mm
1 Collet 8 mm (installed)
1 Extractor
1 Rip fence with 2 guides
1 Copy casing with 2 screws
1 Centring pin
1 Milling set 12 parts
1 Reducer
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside POF 1200 A1 - IAN 100129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside POF 1200 A1 - IAN 100129 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info