595319

Parkside PNTS 1500 B3 - IAN 104474 Manual

10
Zoom out
Zoom in
Previous page
1/100
Next page
10
GB
container (5).
2. Secure the feet with the Philips
head screws supplied.
3. Place the motor housing (3) on
top of the collector (5) and close
it with the clip.
4. Lightly squeeze together the
ends of the retaining bracket
(25) and click it into the motor
housing (3).
5. Installing the accessories:
- Attach the vacuum hose (18).
- Fit the handle with air control
(15).
- Install the telescopic suction
tube (16). (Press the button on
the telescopic suction pipe to-
wards
and pull out to the
desired length).
- Install the nozzle desired (
21/22/23/24).
Never vacuum without a
lter!
Operation
Fully unwind the suction hose (
18) before commencing work.
Switching on/off
Connect the mains plug.
To vacuum dust, plug the electrical
tool onto the mains socket on the
vacuum (
9).
Only connect electrical appliances
with a maximum power rating of
2200 W.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch
( 10)
to the “I”
position.
Switch on electrical appliance +
vacuum cleaner:
1. Move the On/Off switch
(10)
to the position
2. Switch on electrical appliance.
Switching on the electrical appli-
ance automatically switches on the
vacuum cleaner. Once the electrical
appliance has been switched off,
the vacuum cleaner switches off fol-
lowing a time lapse.
Switching off the vacuum cleaner:
Move the On/Off switch
( 10)
to the
“0” position.
Work breaks
To store the assembled suction set during
a work break, the telescopic suction tube
(16) can be pushed
together and the suction tube holder
(17) plugged into the socket on the mo-
tor head (3);
Place the telescopic suction tube (16)
in the retaining bracket (25).
Dry vacuuming
The appliance is supplied with the
uted lter (11) tted.
Vacuuming with a uted lter:
1. To vacuum dry, t the uted lter (11a)
onto the lter cage on the motor hous-
ing (3). Here, the upward curved seal-
ing lip must point away from the motor
housing.
2. Fit the lter cover (11b) and turn it gen-
tly to lock it:
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNTS 1500 B3 - IAN 104474 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNTS 1500 B3 - IAN 104474 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info