626712
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
GB
edges,byjamming,orbypullingon
the cable.
• Beforeeachuse,checkthepowersup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn. Danger of electric shock hazard.
• Ifthepowercableforthisequipmentis
damaged, it must be replaced by the
manufacturer, a customer service agent
ofthesameorasimilarlyqualiedper-
son in order to prevent hazards.
• Switchthemachineoffandpullthe
plug under the following circumstances:
- when you are not using the device,
- transporting it or leaving it unat-
tended;
- when you are checking the device,
cleaning it or removing blockages;
- when you are carrying out cleaning
or maintenance work or replacing
accessories;
- when the power or extension cable
is damaged; after contact with for-
eign bodies or in case of abnormal
vibration.
• Onlyusereplacementpartsandacces-
sories delivered and recommended by
our Service Centre (see page 32). The
use of parts by other manufacturers im-
mediately renders the guarantee void.
• Donotusethecabletopulltheplug
out of the socket. Protect the cable from
heat, oil, and sharp edges.
• Makesurethatthemainsvoltagecor-
responds with the information on the
rating plate.
• Onlyplugtheapplianceintoasocket
whichissafeguardedbyatleast16A.
• Thedevicemustonlybeconnectedto
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
agecurrentofnotmorethan30mA.
The following states how damage
to the appliance and possible in-
jury to people can be avoided:
• Ensurethatthemachineiscorrectly
assembledandtheltersareinthecor-
rect position.
• Donotusewithoutthelter.Thiscould
damage the machine.
• Onlyhaverepairscarriedoutatour
authorised customer service points.
• Observetheinstructionsforcleaning
and maintenance of the machine.
• Storetheapplianceinadryplaceand
out of reach of children.
Assembly
Pull out the mains plug.
Danger of electric shock.
1. Plug the front steering castor (11) into
the slot on the front of the stainless
steel container (9). Fix the steering cas-
tor with 2 crosshead screws.
2. Plug the attachment ports (15) with the
rear steering castor (14) into the slot
on the rear of the stainless steel con-
tainer (9). Screw these in place with 2
crosshead screws.
3. Fit both wheels (12) and plastic wash-
ers(atsurfacetowardstheequip-
ment). Fix each wheel with 1 cross-
head screw. Fit the hubcaps.
4. Fit the bow handle (1) onto the two
bow handle tie bars (2) and screw it in
place with 2 crosshead screws.
5. Fold down the bow handle (1) towards
the suction nozzle (8). Place the mo-
tor head (3) on the stainless steel
container (9). Close the stainless steel
container by folding up the bow han-
dleandxingitwiththelockinglevers
(thetensioncanbeadjusted
withthelockingleveradjustingscrew).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNTS 1400 B1 - IAN 74286 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNTS 1400 B1 - IAN 74286 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PNTS 1400 B1 - IAN 74286

Parkside PNTS 1400 B1 - IAN 74286 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info