635685
34
Zoom out
Zoom in
Previous page
1/44
Next page
34
GB
Before each use, check the power sup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn.Danger of electric shock hazard.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer ser vice agent
of the same or a similarly qualied per-
son in order to prevent hazards.
Switch the machine off and disconnect
the mains plug:
- when the machine is not in use,
- before the machine is opened up,
- for all maintenance and cleaning
work,
- if the connecting cable is damaged
or tangled up.
Only use replacement parts and ac-
cessories delivered and recommended
by our Ser vice Centre (see addresses
page 39). The use of parts by other
manufacturers immediately renders the
guarantee void.
Do not use the cable to pull the plug
out of the socket. Protect the cable from
heat, oil, and sharp edges.
Make sure that the mains voltage cor-
responds with the information on the
rating plate.
Only plug the appliance into a socket
which is safeguarded by at least 16A.
The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30mA.
CAUTION! The following states
how damage to the appliance and
possible injury to people can be
avoided:
Ensure that the machine is correctly
assembled and the lters are in the cor-
rect position.
Do not use without the lter. This could
damage the machine.
Only have repairs carried out at our
authorised customer ser vice points.
Observe the instructions for cleaning
and maintenance of the machine.
Store the appliance in a dry place and
out of reach of children.
Assembly
Pull out the mains plug.
This will prevent danger of injury
from electric shock.
1. Attach the carr ying handle
(2) rmly using the cross-head
screws supplied.
Ensure that the notches on the
carrying handle go onto the lugs
on the motor head (1) (see small
picture).
2. Attach the feet (7) and secure the
feet with the Philips head screws
supplied.
3. Insert the lter:
- Foam lter for wet vacuuming
(
15).
- Material lter (
16) for dr y
vacuuming
- Paper lter bag for ne dust
(
17)
Never vacuum without a lter!
4. Place the motor housing (1) on
top of the dirt collector (6) and
close it with the clip (9).
The fastening clips must be
hooked into the snap-in points
provided.
5. Connect the vacuum hose (13)
and the accessories.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNTS 1300 B2 - IAN 78834 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNTS 1300 B2 - IAN 78834 in the language / languages: French as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PNTS 1300 B2 - IAN 78834

Parkside PNTS 1300 B2 - IAN 78834 User Manual - English, German, Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info