679422

Parkside PMTS 180 A1 - IAN 304732 Manual

5
Zoom out
Zoom in
Previous page
1/47
Next page
PMTS 180 A1
■ 2 
│
 GB
│
IE
│
NI
│
CY
METAL CUT-OFF GRINDER
PMTS 180 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The cut-off grinder is intended as a floor-mounted
appliance for making straight longitudinal cuts at
up to 45° using cutting discs in steel, nonferrous
metals, cast iron and iron profiles without the use
of water.
Any other uses of or modifications to the machine
are deemed to be improper usage and may result
in serious physical injury.
Not for commercial use.
Features
ON/OFF switch
Clamping flange (inside)
Spindle lock
Cutting disc
Rapid adjustment
Vice
Drillholes
Cutting angle adjustment
Transport safety device
Cutting depth adjustment
Motor unit
Handle
Figure A:
Pendulum cover
Protective cover
14a
Integrated carrying handle
Mounting screws
Figure B:
Clamping flange (outside)
Plain washer
Fixing nut
Figure C:
Hex key (large)
Hex key (small)
Package contents
1 metal cut-off grinder PMTS 180 A1
1 cutting disc Ø 180 mm (pre-fitted)
2 Hex keys
1 set of operating instructions
Technical data
Rated voltage: 230 V ∼, 50 Hz
(alternating current)
Rated power consumption: 1280 W
Rated idle speed: n
0
7700 rpm
Cutting disc mounting: ø 22.23 mm
Thread size: M8
Maximum speed
of the cutting disc:
8500 rpm
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pmts-180-a1---ian-304732

Reset search

  • The brushes on the motor have worn away after very littli use.
    where can I purchase a set of brushes?. Submitted on 13-6-2020 at 17:57

    Reply Report abuse

    • Same happened with mine, one disc, one set of brushes....junk Answered on 26-10-2020 at 12:04

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMTS 180 A1 - IAN 304732 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMTS 180 A1 - IAN 304732 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMTS 180 A1 - IAN 304732

Parkside PMTS 180 A1 - IAN 304732 User Manual - German, Dutch, Danish, French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info