558605
13
Zoom out
Zoom in
Previous page
1/82
Next page
PARKSIDE
Advice on the use of sand paper
· Coarse sand paper: is recommended for the quick removal of paint, varnish and rust.
· Medium sand paper: is most suitable for the ordinary removal of paint, varnish and rust.
· Fine sand paper: for smoothing surface coatings and finishing work.
Fitting the sanding sheets
Caution! Before starting any work on the palm detail sander, make sure that the tool is switched off
and the mains plug is out of the socket.
1. Hold the palm detail sander with the backing plate
upwards, refer to Fig. C.
2. Fit the sanding sheet exactly over the backing plate.
3. Make sure that the holes in the sanding sheet coincide with the holes in the backing plate.
When the sanding sheet becomes worn, simply remove it from the backing plate and fit a new one
as described above.
Attaching a suction device
Caution! Before starting any work on the palm detail sander, make sure that the tool is switched
off and the mains plug is out of the socket.
The palm detail sander is supplied with a dust extraction adapter. When sanding wood a suitable
suction device designed for that purpose should be attached to the dust extraction adapter
.
1. Attach the dust extraction adapter
to the adapter port at the back of the sander.
2. Connect the hose of the suitable suction device to the adapter
.
Preparing the sander for use
The mains voltage at the mains socket must match that shown on the rating plate on the tool.
Tools marked with 230 V can also be operated at 220 V.
Caution! When using the tool, never allow the ventilation slots to be covered.
Hold the sander as shown in figure A.
Ensure that the backing plate
lies flat on the workpiece.
The palm detail sander PMS 130 has a backing plate
that can rotate through 360 degrees.
This allows you to maintain the best grip on the tool even when working on difficult to access areas.
Work in such a way that creates as little dust as possible.
Operation
GB 13
ƽ
ƽ
ƽ
manual PMS 130 03.12.2003 9:10 Uhr Seite 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMS 130 - KH 3135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMS 130 - KH 3135 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info