819505
65
Zoom out
Zoom in
Previous page
1/388
Next page
GB MT
65
tus should amount to 40-60% during a
lengthy storage period.
Check the battery charge status ap-
proximately every 3 months during
a prolonged storage period and re-
charge if necessary.
Disconnect the charging station from
the boundary wire
Insulate the contacts of the boundary
wire with adhesive tape.
If you are starting the device after
an extended storage period, clean
the battery contacts on the device and the
charging prongs ( 29) on the charging
station with a brass brush to prevent charg-
ing problems.
Transport
(Fig )
A carrying handle (8) for transporting the
device is located on the rear of the lawn
mower.
Always carry the lawn mow-
er with the blades (20) point-
ing away from your body.
Risk of injury!
Disposal and protection
of the environment
Remove the battery from the device and
recycle the battery and packaging in an
environmentally-friendly manner. Dispose
of the packaging material properly.
Electrical appliances must not be
disposed of with the domestic
waste
Replacing the blades
3. Remove the old blades (20).
4. Refasten the new blades (20) with the
blade bolts (19).
Removing blockages
Wear safety gloves.
There is a risk of injury.
1. Turn the lawn mower over.
2. Open the battery compartment (31) by
removing the 4 screws on the under-
side of the device.
3. Remove the battery (32).
4. Remove the blockage.
5. Reinsert the battery (32).
6. Close the battery compartment (31).
Storage
Store the device in a dry place, out of
reach of children.
Do not enclose the device in nylon
sacks as this may cause moisture to
form.
We are not liable for damage cause by
our devices if this is caused by improper
repair, the use of non-original parts or in-
correct use.
Storage over winter
We offer a winter service. Find out
more on our website:
www.grizzlytools.de/service/maehroboter-
winterdienst
Clean the device prior to storage (see
“Cleaning and maintenance”).
Only store the battery when it is in a
partially-charged state. The charge sta-
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMRA 20-Li B2 - IAN 462730 Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMRA 20-Li B2 - IAN 462730 Robot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info