796098

Parkside PMPS 200 A1 - IAN 389215 Manual

10
Zoom out
Zoom in
Previous page
1/365
Next page
10 GB/IE/NI/CY/MT
PLEASE NOTE: Changes to technical and visual aspects of the product may be made as part of
future developments without notice. Accordingly, no warranty is offered for the physical dimensions,
information and specifications in these operating instructions. The operating instructions cannot therefore
be used as the basis for asserting a legal claim.
PLEASE NOTE: The use of the term ‘device’ in the following text refers to the multi-welder with
double pulse technology described in this instruction manual.
zSafety instructions
Please read the operating instructions with care and observe
the notes described. Familiarise yourself with the device, its proper
use and the safety instructions using these operating instructions.
The rating plate contains all technical data of this welder; please
learn about the technical features of this device.
Keep the packaging material away from small
children. There is a risk of suffocation!
Repairs or/and maintenance work must only be carried out by
qualified electricians.
This device may be used by children aged 16 years and older,
and by persons with reduced physical, sensory or mental capaci-
ties, or a lack of experience and knowledge, if they are supervised
or have been instructed in how to use the device safely and
understand the dangers that may arise when using it. Do not allow
children to play with the device. Cleaning and day-to-day mainte-
nance must not be performed by children without supervision.
Repairs or/and maintenance work must only be carried out by
qualified electricians.
Only use the welding cables provided in the scope of delivery.
During operation, the device should not be positioned directly
against the wall, should not be covered or jammed between other
devices so that sufficient air can always be absorbed through the
ventilation slats. Make sure that the device is correctly connected
to the mains voltage. Avoid any form of tensile stress of the power
cable. Disconnect the mains plug from the socket prior to setting up
the device in another location.
If the device is not in operation, always switch it off by pressing
the ON/OFF switch. Place the electrode holder on an insulated
surface and only remove the electrodes from the holder after
allowing it to cool down for 15 minutes.
Pay attention to the condition of the welding cable, electrode
holder and the earth terminals. Wear and tear of the insulation
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMPS 200 A1 - IAN 389215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMPS 200 A1 - IAN 389215 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info