Manual Parkside PMH 2400 A1 - IAN 356315 (page 23 of 125) (English, German, Dutch, French, Polish)

764039

Zoom out

Zoom in

1/125

GB IE

• Remember that the user is re-

sponsible for accidents or ha-

zards towards other people or

their property.

Preparation

• Wear hearing protection and

safety goggles. Wear these at

all times while operating the

machine. There is a risk of hea-

ring damage and eye injuries.

• Always wear sturdy shoes and

full-length trousers during opera-

tion of the machine. Do not ope-

rate the machine in bare feet

or with open sandals. Avoid

wearing clothing that is hanging

loose or clothing with hanging

ribbons or cords. These could

get caught in the hopper and

lead to serious injuries.

• Only use the machine out in the

open (i.e. not against a wall

or other rigid object) and only

while standing on a solid, level

surface.

• Do not use the machine on a

paved surface or a gravel sur-

face where the ejected material

could cause injury.

• Before putting into operation,

always visually inspect the

machine, the cutting tools, the

screws of the cutting tools and

other fastening materials to

ensure they are secure, and

that the housing is undamaged

and the safety equipment and

protective guards are in place.

Damaged or worn parts are to

be replaced as a set to ensure

the machine remains balanced.

Damaged or illegible stickers

must be replaced.

• Before putting the machine into

operation, always visually check

the connecting cable and exten-

sion cable for signs of damage

or ageing. If the connection

cable is damaged during use,

disconnect it immediately from

the power supply. Do not touch

the connection cable before it

has been disconnected from the

power supply. Do not use the

machine if the connection cable

is tangled, damaged or worn.

Operation

• Before turning on the machine,

ensure that the hopper is empty.

• Keep your head and body

away from the feed opening.

• Do not allow hands or other

body parts or clothing to enter

the hopper, or discharge chute,

or to be in the vicinity of moving

parts.

• Ensure you are standing secu-

rely and do not lose your ba-

lance. Avoid an abnormal work

posture. Do not lean forward.

When material is being fed in,

never stand on a higher level

than the base of the machine.

• Always stand outside the ejec-

tion zone while operating the

machine.

• Do not use the machine in

the rain and poor weather,

especially when there is a risk

of lightning, to reduce the risk

of lightning strikes. Only work

in daylight or where there is suf-

cient illumination.

• If you are tired or lacking in

What is the part number for spare carbon brushes for the motor (item 49 on the exploded drawing in the manual)? Submitted on 25-2-2023 at 15:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMH 2400 A1 - IAN 356315 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMH 2400 A1 - IAN 356315 Manual

Product: