733443
24
Zoom out
Zoom in
Previous page
1/124
Next page
24
GB IE
with damaged or defective
safety equipment or protective
guards, of if the safety equip-
ment, e.g. the collection bag,
are not in place.
Do not operate the machine
with a damaged or worn out
cable.
Do not connect a damaged
cord to the power supply.
Keep the extension cable away
from dangerous moving parts to
prevent damage to cables that
can lead to contact with live
parts.
K
eep the ventilation holes free
of waste and other deposits to
protect the motor from damage
or re.
Do not transport the machine
while the motor is in operation.
Switch the machine off and pull
out the mains plug. Make sure
that all moving parts have come
to a complete stop
- before leaving the machine;
- before clearing any blockages
or cleaning out clogged ducts;
- if the connection cable or ex-
tension cable is damaged or
entangled;
- before checking, cleaning or
working on the machine.
Do not tilt the machine while the
motor is running.
Do not overload your machine.
Only work within the power
range indicated. Observe the
maximum indicated branch
thickness. Do not use your ma-
chine for purposes for which it
is not intended.
Only turn off the machine once
concentration or have consumed
alcohol or tablets, do not work
with the machine. Always have
a break on time. Work using
common sense.
When feeding in material, pay
special attention to ensure it
does not contain any metal,
stones, bottles, cans or other for-
eign bodies.
If foreign bodies enter the cut-
ting tools, or if the machine
generates unusual noises or
vibrates unusually, immediately
turn off the power supply and
allow the machine to come to a
standstill. Disconnect the machi-
ne from the mains supply and
perform the following steps be-
fore switching the machine on
again and operating it:
- check the machine for damage;
- replace or repair all damaged
parts;
- check whether there are any
loose parts and tighten as
necessary.
Ensure the material being
processed does not collect in the
ejection zone; this could prevent
proper ejection and lead to the
material being thrown back out
through the feed opening.
If the machine becomes clog-
ged, turn off the power supply
and disconnect the machine
from the mains supply before
starting to clean it out.
Ensure the motor is free of waste
and other deposits to protect the
motor from damage or the po-
tential for re.
Do not operate the machine
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMH 2400 A1 - IAN 325329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMH 2400 A1 - IAN 325329 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info