Manual Parkside PMFW 310 B1 - IAN 270411 (page 9 of 65) (English, German, Dutch, French, Swedish, Finnish)

679206

Zoom out

Zoom in

1/65

9 GB/IE

General power tool safety warnings General power tool safety warnings

you are using the device. Pull the plug

out of the mains socket immediately and have

the device repaired by a suitably qualiﬁed per-

son or at your service centre. Damaged mains

leads increase the risk of electric shock.

Wear protective gloves when replacing

a tool in the device. Tools heat up with

prolonged use.

Use the electrical power tool only for

dry abrading / sawing / cutting.

Do not operate the device if it is damp

and do not use it in a damp environ-

ment. Water entering an electrical device in-

creases the risk of electric shock.

Keep your hands away from the area

of the saw blade. Do not grip the underside

of the workpiece. Contact with the saw blade

may result in injury.

Use a suitable detector to locate con-

cealed services supply cables / pipes

or approach your local public utilities

services providers. Contact with electricity

cables can lead to ﬁre or electric shock.

Damaging a gas pipe can lead to an explo-

sion. Penetration of a water pipe can lead to

property damage or to electric shock.

If you use the device outdoors, always

connect it through a residual current

device (RCD) with a maximum trip cur-

rent of 30 mA. If using an extension lead, al-

ways use one that is approved for outdoor use.

Any harmful / noxious dusts

generated from sanding represent a risk to the

health of the person operating the device and

to anyone near the work area.

Wear safety glasses and a dust pro-

tection mask!

Ensure that there is adequate ventila-

tion when working on plastic, paint,

varnish etc.

Do not soak the materials or the sur-

face you are about to work on with

liquids containing solvents.

Remaining risks

Even with proper use of this power tool there are

always residual risks. The following hazards may

arise in connection with the construction and design

of this power tool:

a) Lung damage when appropriate breathing

protection is not worn.

b) Hearing damage when suitable hearing protec-

tion is not used.

c) Damage to health arising from vibration when

using the power tool for extended periods or

when used and maintained improperly.

This power tool generates an

electromagnetic ﬁeld during use. This ﬁeld could

possibly actively or passively impact medical implants.

To reduce the risk of serious or fatal injuries we rec-

ommend persons with medical implants consult their

physicians and the manufacturer of the medical im-

plant before using this machine.

Advice on use

Principle of operation:

The oscillating drive causes the attached tool to vi-

brate backwards and forwards up to 21000 times

per minute. This means the tool can produce precise

work in the tightest of spaces.

Sawing / cutting:

Use only undamaged, defect-free saw blades.

Distorted, blunt or otherwise damaged saw

blades could break.

When sawing lightweight building materials,

observe the statutory requirements and the

manufacturer’s recommendations.

Use the device in plunge sawing mode on soft

materials such as wood, gypsum plaster board

etc. only!

Sanding:

Ensure that you use even contact pressure. This

will increase sanding sheet life.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMFW 310 B1 - IAN 270411 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 3,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMFW 310 B1 - IAN 270411 Manual

Product: