634195

Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6 GB/IE
Introduction / General safety advice for electrical power toolsIntroduction
Multi-Purpose Tool PMFW 280 A2
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de
scribed
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Q
Proper use
The device is intended for sawing, cutting and sand-
ing. The preferred materials on which the device
can be used are: wood, plastic, drywalling, non-fer-
rous metals, fixings (e.g. nails, screws) and wall
tiles. It is particularly suitable for working close to
edges and precise work. Any other use or modifi-
cation to the device shall be considered as improper
use and could give rise to considerable dangers. We
will not accept liability for loss or damage arising
from improper use. Not suitable for commercial use.
Q
Features and equipment
1
ON / OFF switch
2
Oscillation speed setting wheel
3
Ventilation slots
4
Clamping plate
5
Plunge saw blade (20 mm) Z20 A2
6
Plunge saw blade (32 mm) Z32 A2
7
Backing plate
8
Segment saw blade Z85 A2
9
Scraping knife Z52 A2
10
Clamping screw
11
Allen key
12
Sanding sheet
13
Vacuum dust extraction assembly (3-piece)
13 a
Housing attachment
13 b
Vacuum dust extraction duct
13 c
Ring connector
Q
Included items
1 Multi-Purpose Tool PMFW 280 A2
1 Plunge saw blade (20 mm) Z20 A2
1 Plunge saw blade (32 mm) Z32 A2
1 Clamping screw and clamping plate (prefitted)
1 Backing plate
1 Segment saw blade Z85 A2
1 Scraping knife Z52 A2
18 Sanding sheets
1 Dust extraction system
1 Allen key
1 Operating instructions
Q
Technical data
Rated power consumption: 280 W
Rated voltage: 230 V∼ 50 Hz
No-load rotational speed: n
0
15000–21000 min
-1
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in ac-
cordance with EN 60745. The A-weighted noise
level of the electrical power tool are typically:
Sound pressure level: 85.1 dB(A)
Sound power level: 96.1 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
The total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
Sanding:
Vibration emission value a
h
= 2.930 m / s
2
,
Uncertainty K = 1.5 m / s
2
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool in the language / languages: French, Swedish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool

Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool User Manual - English, German, Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info