679133

Parkside PMFW 200 - IAN 26050 - KH 3027 Manual

31
Zoom out
Zoom in
Previous page
1/45
Next page
31 GB/MT
Materials:
Wood, paint
Use:
· Sanding at edges and in difficult to access areas
Q
Changing the attached tool
J
WARNING!
DANGER OF INJURY!
Pull the mains plug out of the mains
socket before you carry out any task
on the electrical power tool.
j Remove any tool already inserted. To do this,
release the screw
6
using the Allen key
8
and take off the tool.
j Place the tool (e.g. plunge saw blade
7
) on
the tool mount
5
.
NOTE: You can place the tool in any of the
possible positions on the tool mount
5
.
j Fasten the tool in place with the screw and
washer
6
. Tighten the crew
6
using the Allen
key
8
.
J Check that the tool is firmly seated.
Incorrectly or insecurely attached tools could
become lose during use and injure you.
Q
Place a sanding sheet
on the backing plate
j Offer up the sanding sheet
9
to fit flushly on
one side of the backing plate
10
, then apply
the sanding sheet to the backing plate.
Q
Vacuum extraction of
dust / debris
Do not use the tool on materials containing asbestos.
Asbestos is a known carcinogen.
WARNING!
DANGER OF FIRE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
uum‘s dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device’s dust collection box and the vacuum clean-
er’s dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
j Always use vacuum dust extraction.
j Ensure that your working area is well ventilated.
j Observe the regulations applicable in your
country for the materials you are working on.
Q
Connecting a vacuum
dust extraction device
j Always connect a vacuum dust extraction de-
vice when you are sanding.
Connection:
j Push the adapter for external vacuum extrac-
tion
12
on to the dust extraction port
3
. If it is
necessary to use the reducer piece
13
, push
the reducer piece into the adapter for external
vacuum extraction
12
.
j Push the hose of a suitable dust extraction de
vice approved for that purpose (e.g. a work-
shop vacuum cleaner) on to the adapter for
external vacuum extraction
12
or the reducer
piece
13
.
Removal:
j Pull the hose of the dust extraction device off
the adapter for external vacuum extraction
12
.
j Pull off the adapter for external vacuum extrac-
tion
12
(with the reducer piece
13
if used).
Assembly
26050_Multifunktionswerkzeug_Content_LB5.indd 31 24.03.09 14:25
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMFW 200 - IAN 26050 - KH 3027 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMFW 200 - IAN 26050 - KH 3027 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMFW 200 - IAN 26050 - KH 3027

Parkside PMFW 200 - IAN 26050 - KH 3027 User Manual - German, Dutch, Portuguese - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info