722834
26
Zoom out
Zoom in
Previous page
1/242
Next page
26
GB IE
Overview
1 Motor housing
2 Handle
3 Volume control
3a Turbo button
4 On/Off switch
5 Rechargeable battery
5a Release button
6 Charger
7 Protective cover, suction aperture
7.1 Marking, protective cover for
suction aperture
7.2 Marking, motor housing
8 Locking button for suction aper-
ture
9 Blowpipe (three-part)
10 Locking button for blowing aper-
ture
11 Additional handle
12 Fastening eyelets for carrying
strap
13 Carrying strap
14 Collection bag carabiner
15 Collection bag
16 Suction pipe (three-part)
17 Angle adjuster for additional
handle
18 Battery charge level indicator
19 Collection bag eyelets
20 Ventilation opening of collection
bag
21 Push-tlock
Technical data
Cordless leaf
blower/vacuum ........PLSA 40-Li A1
Motor voltage ..............40 V
(2x 20 V)
Current strength .............................. 16 A
Rated power ........................max. 580 W
Idle speed n ............6 000 - 16 300 min
-1
Air speed ........................ max. 285 km/h
Air suction volume ............ max. 450 m
3
/h
Shredding rate .................................10:1
Collection bag ................................. 45 l
Protection type.................................IPX0
Weight (without battery)
Blow function .......................... 2,75 kg
Suction function ....................... 3,70 kg
Sound pressure level
(L
pA
) ................... 83,4 dB (A), K
pA
= 3 dB
Sound power level (L
WA
)
guaranteed ............................ 96 dB(A)
measured ............94,7 dB(A); K
WA
= 3 dB
Vibration (a
h
)
handle ................1,10 m/s
2
; K= 1,5 m/s
2
additional handle 1,06 m/s
2
; K= 1,5 m/s
2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PLSA 40-Li A1 - IAN 315641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLSA 40-Li A1 - IAN 315641 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info