595320

Parkside PLLL 16 A1 - IAN 111527 Manual

31
Zoom out
Zoom in
Previous page
1/34
Next page
28
PLLL 16 A1
GB
28
Soldering
Vapours can lead to headaches and
fatigue if inhaled.
■ The soldering iron has a rated power output of
30 watts and is ideal for electronic solders.
■ Its design makes it especially suitable for
difficult-to-access and fine soldering work.
■ The best results are achieved with electronic
solder, 1.0 or 1.5 mm diameter, 60% Sn, 40%
Pb. We recommend using contact solder paste
as a flux (not solder paste or soldering fluid).
♦ Clean the soldering tip
on the moist soldering
sponge
.
♦ After cleaning, the soldering tip must be tinned.
Tin the hot soldering iron by melting the solder.
♦ Guide the soldering tip to the solder and heat it.
♦ Place the solder (with flux) between the solder
joint and soldering tip to melt it.
♦ Keep feeding in solder until the entire solder
joint is moistened.
♦ Then remove the soldering tip immediately to
prevent overheating the molten solder.
♦ Allow the solder to harden and avoid vibrations.
NOTE
► The flux is either included in the solder or it is
applied separately.
When buying the solder ask about its use
and the appropriate flux.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
pull the plug out of the socket and let
the appliance cool down before you
carry out any work on the appliance.
Soldering iron:
■ Clean the appliance after completion of the
work.
■ To clean the housing, use a cloth and a mild
detergent if necessary.
■ Never use sharp objects, petrol, solvents or
cleaning agents that can damage plastic.
■ Do not allow any liquids to get into the interior
of the appliance.
LED magnifier lamp:
■ Remove loose particles with clean compressed
air and then brush off the remaining deposits
with a soft lens brush.
■ Clean the surface with a lens cleaning tissue
or a clean, soft and lint-free cloth. To remove
fingerprints and other fatty deposits, the cloth
may be moistened with water or a lens-cleaning
fluid.
■ Do not use any acid, alcohol or other solvents
or rough, linty cloths to clean the lens. Avoid
excessive cleaning and excessive pressure.
NOTE
► Avoid touching the magnifying glass with
your finger nails or other sharp objects.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PLLL 16 A1 - IAN 111527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLLL 16 A1 - IAN 111527 in the language / languages: French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PLLL 16 A1 - IAN 111527

Parkside PLLL 16 A1 - IAN 111527 User Manual - English, German, Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info