Manual Parkside PLH 2800 B2 - IAN 315130 (page 16 of 50) (English, German)

733458

Zoom out

Zoom in

1/50

GB IE NI

• For safety reasons, the shredder will not

operate without a correctly attached

collector box (17).

• Keep hold of branches while feeding

them into the shredder until they are

automatically drawn in.

• Be aware of the possible intake speed

of the cutter and do not overload the

equipment.

• Do not allow shredded material to

accumulate near the ejection area. This

may otherwise hinder proper ejection

and force the material back up through

the funnel feeder.

• To protect the shredder from clogging,

shred wilted garden waste that has

been left for a few days and shred thin

twigs alternately with branches.

• Before you shred roots, remove any

remaining soil and stones from them

• Do not shred soft, damp material such

as kitchen waste, grass or leaves:

compost it directly.

• Keep a few dry branches for the end,

as they will help clean the shredder.

• Only switch the shredder off when all

of the shredding material has passed

through the cylinder blade (24).

Otherwise, the cylinder blade (24)

may jam the next time you switch the

shredder on.

Shredding the material

1. Connect the power supply and

switch the shredder ON to start

shredding the material (see"

switch the shredder on and off" )

2. Adjust the pressure plate (25) to

correct position by rotating the

adjustor screw (5). (see" adjusting

the pressure plate")

3. Insert the material into the funnel

feeder (8) until you see the

shredded material comes out and

falls into the collector box (17).

The designed system between

blade (24) and pressure plate

(25) will draw the material in

automatically. If failed, you can

use the pusher (14) to push the

material down along the funnel

feeder(8).

Empty the collector box (17)

when it is about 3/4 full. (See

"emptying the collector box".)

Freeing up a jam

Overload protection switch (12)

motivated

1. Press the function switch (9) to

return to neutral position.

2. After 1-2 minutes, press down the

overload protection switch (12) to

repower the machine.

3. Press the function switch (9)

upwards to allow the blade

rotate anti-clockwise to return the

material.

4. Press and hold the "ON" switch

(10) to start the machine to return

the jammed material.

5. Switch the shredder ON and OFF

(see" switching the shredder on

and off ) to check if the jam is

fixed.

6. If jam is fixed, switch the shredder

ON (see" switching the shredder

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLH 2800 B2 - IAN 315130 in the language / languages: English, German as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PLH 2800 B2 - IAN 315130

Parkside PLH 2800 B2 - IAN 315130 User Manual - German, Dutch, French, Polish - 125 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PLH 2800 B2 - IAN 315130 Manual

Product: